Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Tidak dengan batok lampu Tegangan: DC12V Daya: Hi Beam 30W / Lo Beam 30W LED: CREE XLamp XP-L LED Suhu warna: 6000K Warna: White
No Lamp Body Rated Voltage: DC12V Power Consumption: Hi Beam 30W / Lo Beam 30W LEDs: CREE XLamp XP-L LEDs Color Temperature: 6000K Color Emission: White
[Deskripsi]
Kombinasi lampu depan bohlam H4 favorit Anda dan bohlam LED H4 Pro-tech memberikan kecerahan yang jauh lebih tinggi daripada LED biasa!
Kit bohlam lampu depan LED ini mencakup kit bohlam lampu depan LED H4 Pro-tech dan harnes koneksi lampu depan yang kompatibel dengan W800. *Spesifikasi bohlam H4 lampu depan 180 diperlukan secara terpisah untuk pemasangan.
Bohlam LED H4 ini digunakan bersama dengan lampu depan LED normal '19-W800 saat menggantinya dengan lampu depan tipe bohlam 180mm H4 eksternal. Warna pancaran cahaya putih 6000 Kelvin. Silakan beli lampu depan secara terpisah.
Apakah Anda merasa lampu depan LED biasa terlalu gelap? '19- Lampu depan LED normal W800 Lo beam menyala 7w dan seterang bohlam halogen. Jika Anda berpikir bahwa LED lebih terang daripada bohlam konvensional, Anda akan kecewa dengan kecerahan LED biasa. Lampu depan LED normal tidak dapat dicerahkan dengan mengganti dengan LED eksternal tidak seperti lampu depan jenis bohlam. Produk ini memungkinkan Anda untuk memasang bohlam LED H4 Pro-tek dengan mengganti unit lampu depan, dan lampu depan akan terlahir kembali berkali-kali lebih terang.
Lensa Multi-Reflektor yang Luar Biasa Dudukan LED ditempatkan secara horizontal pada permukaan lensa lampu depan LED biasa, dan banyak pengguna merasa tidak nyaman dengan desain lampu depan.
Lensa multi reflektor dapat digunakan untuk menciptakan tampilan dan nuansa yang bersih. Ukuran lampu depan hampir sama dengan lampu depan biasa, sehingga ideal untuk sasis W800 dan memberikan hasil akhir yang seimbang.
Tersedia dalam dua suhu warna, 6000K dan 3000K Warna 6000 Kelvin adalah warna khas LED biru-putih, sedangkan warna 3000 Kelvin adalah warna bohlam halogen yang lebih klasik..
Sesuai dengan standar inspeksi kendaraan! Intensitas cahaya maksimum diukur menjadi 39.600 candela, yang lebih tinggi dari 15.000 candela, nilai standar untuk memenuhi inspeksi kendaraan. Intensitas cahaya maksimum adalah 39.600 candela, yang lebih tinggi dari standar 15.000 candela. Protec telah memperkenalkan penguji lampu depan HT-322 yang dibuat oleh BANZAI untuk mengukur selama pengembangan. Nilai terukur didasarkan pada lampu depan LBH-K03/LBH-K04.
Mengadopsi LED CREE yang andal! Sebanyak enam LED CREE XLamp XP-L digunakan untuk elemen pemancar cahaya, tiga di sisi balok Hi dan tiga di sisi balok Lo.
Pendinginan kipas angin listrik yang tahan air Karena arus input dari LED yang sangat terang sangat besar, mereka menghasilkan panas dan menjadi panas. Produk ini menggunakan sistem pendingin kipas listrik tahan air yang sangat tahan lama untuk mendinginkan panas. Ini adalah peralatan penting untuk menjaga kecerahan stabil.
Dimensi lampu depan yang dapat dipasang LHL-K03, LHL-K04 Harap siapkan lampu depan yang dapat dipasang secara terpisah dengan mengacu pada gambar dimensi lampu depan normal seri 19- W800 pada gambar. Jika lebar kotak lampu terlalu kecil, gunakan 8mm spacer collar . yang tersedia di pasaran.
Suku Cadang yang Dibutuhkan LBH-K03, LBH-K04 Lebar badan lampu depan produk ini adalah 175mm. Karena jarak antara lampu depan tetap di sisi kendaraan lebih lebar, maka perlu dipasang spacer collar setebal 23-24mm di salah satu sisi antara lampu depan dan penyangga lampu depan..
Jika Anda memiliki pertanyaan, jangan ragu untuk menghubungi kami. Silakan lihat produk berikut:. k・con Aluminium spacer collar [Perak] No.0900-093-00031 8.2 / od. 20 x ketebalan 8...2 pcs No.0900-093-00057 8.2 / od. 20 x ketebalan 15...2 pcs Atau k・con Aluminium spacer collar [Hitam] -No.0900-093-02031 8.2 / od. 20 x ketebalan 8...2 pcs -No.0900-093-02057 8.2 / od. 20 x ketebalan 15...2 pcs
The combination of your favorite H4 bulb headlights and Pro-tech H4 LED bulbs provides brightness that far surpasses stock LEDs!
Protec H4 LED Headlight Bulb Kit with W800 compatible headlight connection harness. *Φ180 headlight H4 bulb specification is required for installation.
H4 LED bulb for use in combination with the '19-W800 stock LED headlights when replacing them with aftermarket Φ180mm H4 bulb type headlights. Luminescence color is white 6000 Kelvin. Headlight must be purchased separately.
Do you feel that the stock LED headlights are too dim? '19- The stock LED headlight Lo beam on the W800 is on at 7w and is as bright as a halogen bulb. If you look at the image that LED is brighter than conventional bulbs, you will be disappointed in the brightness of normal LED. Unlike the bulb type headlight, the stock LED headlight can not be brightened by replacing with aftermarket LED. This product enables to install PROTEC H4 LED bulb by replacing the headlight unit, and the headlight will be many times brighter.
Sleek multi-reflector lens The LED base is placed horizontally on the lens surface of the stock LED headlight, so it is heard that many users feel uncomfortable with the design of the headlight. The familiar multi-reflector lens can be used to create a clean look and feel. The headlight is the same size as the stock headlight, so it fits the W800 perfectly.
Available color temperatures are 6000K and 3000K Please select your favorite color from two colors: 6000 Kelvin, which is a typical LED blue-white color, and 3000 Kelvin, which is a classic halogen bulb color.
The maximum luminous intensity is 39,600 candela. The optical axis can be adjusted to the standard range without shifting. Protec has introduced BANZAI's HT-322 headlight tester to measure the headlights during development. *Measured values are based on the headlight supplied with LBH-K03 / LBH-K04.In the case of LHL-K01 / LHL-K02, some aftermarket headlights may not meet the standard value due to structural problems.
Adoption of reliable CREE's LED! A total of 6 CREE XLamp XP-L LEDs (3 for Hi beam and 3 for Lo beam) are used as light emitters.
Waterproof Electric Fan Cooling A really bright LED generates heat due to the large input current and becomes hot. In order to cool down the heat, this product adopts a cooling system with a highly durable waterproof electric fan. It is essential equipment to maintain stable brightness.
Mountable headlight dimensions LHL-K03, LHL-K04 Please refer to the '19- W800 series stock headlight dimensions in the image and prepare the headlight that can be installed separately. *If the width of the headlight case is too small, please use a commercially available Φ8mm spacer collar.
Separately required parts LBH-K03, LBH-K04 The width of the headlight is 175mm. Since the distance between the headlight brackets on the vehicle side is wider, it is necessary to install a spacer collar of 23-24mm thickness on one side between the headlight and the headlight bracket. Please prepare it separately by yourself.Please refer to the following products. k・con Aluminum Spacer Collar [Silver] ・No.0900-093-00031 Φ8.2 / Outer diameter 20 x Thickness 8 - 2pcs ・No.0900-093-00057 Φ8.2 / Outer diameter 20 x Thickness 15 - 2pcs Or, k・con Aluminum Spacer Collar [Black] ・No.0900-093-02031 Φ8.2 / Outer diameter 20 x Thickness 8 - 2pcs ・No.0900-093-02057 Φ8.2 / Outer diameter 20 x Thickness 15 - 2pcs
Peringatan
*Memerlukan bohlam lampu depan H4 Φ180 yang dijual terpisah. *Jika lebar batok lampu kecil, gunakan spacer collar 8mm. *Ikuti manual pemasangan dengan seksama. Metode pemasangan yang salah dapat menyebabkan percikan api dan kerusakan produk. *Sebelum pemasangan, harap cek skun kabel di sisi minus (-) aki dan pastikan kuncinya dalam keadaan OFF. *Jangan sentuh atau mengotori chip LED. Tutup akrilik yang terpasang ke bohlam LED memiliki seal. *Produk ini memiliki presisi tinggi sehingga harap berhati-hati. Jangan jatuhkan produk atau menarik kabel dengan paksa. Kecerobohan saat menggunakan produk dapat mengakibatkan produk tidak berfungsi dengan baik, memantik api, menyebabkan cedera, dan kejadian buruk lainnya. Jangan sampai produk mengeluarkan percikan api, mengalami arus pendek, dll karena akan merusaknya. *Jangan bongkar produk apapun kejadiannya. *Jangan lihat langsung ke cahaya LED karena bisa merusak mata. *Jangan sampai mika lampu terkena air ketika lampu menyala atau baru saja dimatikan karena dapat merusak mika dan bohlam. *Jangan pegang bohlam, bracket belakang, atau controller unit karena panas. *Hanya untuk sepeda motor. *Jangan tutupi produk dengan kertas atau kain dan jangan taruh di dekat benda yang mudah terbakar. *Jangan pakai produk saat lampu depan masih menyala karena bisa rusak dan menyebabkan luka bakar. *Produk ini waterproof namun tidak sepenuhnya. Harap tutupi bagian sambungan dari controller dengan tape waterproof atau produk sejenis. Jangan sampai kena basah terus menerus. *Saat mencuci motor, jangan arahkan selang ke produk ini. *Jangan jatuhkan bohlam atau controller unit atau membuatnya terhentak karena bisa mengurangi performanya atau bahkan merusaknya. *Saat merakit lampu LED, pastikan untuk membalurkan cairan gemuk silikon yang sudah disertakan sesuai dengan petunjuk dalam manual pemasangan/ *Jangan tutupi kipas waterproofnya. Pastikan ada celah untuk sirkulasi udara. *Gunakan lem drat jika baut longgar. Kencangkan baut secara berkala. *Pasang produk ke mekanik yang paham betul dengan produk ini. *Pastikan sudut as lampu sudah benar sebelum berkendara karena pancarannya jika tidak pas bisa mengakibatkan kecelakaan. *Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan produsen.
*Φ180 headlight H4 bulb specification is required for installation.
*The maximum luminous intensity is measured by the headlight attached to LBH-K03 / LBH-K04.In the case of LHL-K01 / LHL-K02, some aftermarket headlights may not meet the standard value due to structural problems. *If the width of the headlight case is too small, please use a commercially available Φ8mm spacer collar. *Install the product correctly according to the instruction manual.Improper installation may result in fire or equipment damage. *Before installation, be sure to disconnect the terminal cord on the minus side of the battery and confirm that the key is OFF. *Please do not touch or get the LED chip dirty.Dirt can cause the LED chip to burn due to heat being built-up.The LED bulb comes with an acrylic cap with a sealing seal. *Please handle this product with care as it is a precision instrument.Do not drop the product or pull the wires forcibly.Improper handling may cause malfunction, injury, burns, or serious accidents that may result in death.In addition, sparks, poor insulation, or short-circuiting may cause a failure of the product or a fire in the vehicle. *Do not disassemble or modify this product in any way.Products that have been disassembled or modified are not covered by warranty. *Do not look directly at the LED light when it is on.It can cause visual impairment. *Do not splash water on the lens while the light is on or immediately after it is turned off.Sudden temperature change may cause damage to the lens or LED bulb.In addition, please do not touch the LED bulb itself, the heat sink behind it, and the controller unit because they get to the high temperature. *This product is for motorcycles only, so cannot be used on four-wheeled vehicles.This product is not for use on automobiles. *Do not cover with paper or cloth and do not light near flammable materials.Failure to do so may result in fire or abnormal heating.Also, do not light near flammable items such as flammable spray, thinner, etc. or items that may ignite. *Do not install to the headlight with the light on.Failure to do so may result in malfunction or burns. *This product is waterproof for daily life, but it is not completely waterproof.Wrap the coupler coming out of the controller unit with vinyl tape or self-bonding tape, or use caulking agent to waterproof it.Avoid wetting the product with more water than necessary. *When washing a vehicle with a high pressure washer, please do not let the high pressure wash directly hit this product. *Please do not drop the LED bulb or controller unit, or give it a strong shock.It not only causes breakage, deterioration of performance and shortening of service life, but also causes injury. *When assembling the LED bulb, be sure to apply the supplied silicon grease to the areas indicated by the grease marks in the instruction manual. *Do not cover up the waterproof fan.Make sure that there is enough space behind the fan for the sucked air to flow. *Use a thread locker to prevent loosening of the threaded part.Periodic retightening is also recommended. *Installation requires expertise and skill.Please have it done at a designated maintenance facility with skilled mechanics. *Please adjust the optical axis before use.It may obstruct the view of oncoming vehicles and cause traffic accidents.
*PROTEC is not responsible for any damage or accident caused by the use of this product.Protec will not be responsible for any labor charges or other costs incurred during repair. *If you feel any abnormality during installation or use, please contact your dealer or PROTEC service department. *There may be changes in product specifications due to the manufacturer's reasons.
