- Beranda
- Motor
- KAWASAKI 401 - 750cc
- Z650RS
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Belakang
- A-TECH
- A-TECH: Fender Belakang SPL
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Jenis: Lukisan Warna OEM SelesaiFRP
Dicat jelas Type: Genuine color painted FRP
Pre-clear painted
Dicat jelas Type: Genuine color painted FRP
Pre-clear painted
[Deskripsi]
Kompatibel dengan OEM Swing Arm.
Panjang Rear Fender sekitar 200mm lebih panjang dari Rear Fender OEM.. It is compatible with stock swingarm.
The rear fender is extended approximately 200mm longer than the OEM rear fender.
Panjang Rear Fender sekitar 200mm lebih panjang dari Rear Fender OEM.. It is compatible with stock swingarm.
The rear fender is extended approximately 200mm longer than the OEM rear fender.
Catatan
* Produk ini dibuat berdasarkan pesanan. Kami akan mengonfirmasi waktu pengiriman setelah pesanan diterima.t berbeda dengan aslinya.
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
* Berisi materi lain di dalam foto.
*Gambar yang ditampilkan adalah twill weave carbon.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *About FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image includes other material.
*Installation image shows the one made of: Twill weave carbon.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Gambar yang ditampilkan adalah twill weave carbon.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *About FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*The image includes other material.
*Installation image shows the one made of: Twill weave carbon.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model yang Sesuai
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/