100% Ori Garansi 7 hr Gratis Cashback Nett Tanpa Biaya Tambahan
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bolt pitch: P1.00 Warna coklat Ukuran piston: 12 Tank: upacara terpisah CairanPuting (termasuk) :Φ6,Φ7.3 (90 derajat) Kembali musim semi (termasuk) :Hitam (Standar) ,Merah (Keras) Ujung batang: M6 Kaliper yang Didukung: Diameter piston 32/Φ34 berlawanan dengan 2Piston
[Piston size] Φ12 [Compatible caliper] Piston diameter Φ32 / Φ34 opposed 2-piston [Color] Brown [Bolt pitch] P1.00 [Fluid tank] Separate type [Fluid nipple (included)] Φ6, Φ7.3 (90 degree) [Return spring (included)] Standard, Hard [Rod end] M6
[Deskripsi]
Ujung batangM6 Adaptor lubang (nomor bagian 29000189) dipotong dengan sekrup pada bagian sambungan yang diperlukan untuk memasang master Rem Sam dan baut banjo langsung dipasang untuk mencegah kebocoran cairan..
Saat mengganti kaliper belakang dengan kaliper 2 piston berlawanan (Φ32,Φ34) seperti GALE SPEED atau brembo, tergantung rasionya, lebar langkah pedal rem bisa berkurang, sehingga menyulitkan pengendalian kendaraan.. Silinder master belakang GALE SPEED dirancang dengan diameter piston 12 agar sesuai dengan rasio tuas pijakan kaki balap standar.. Hal ini memungkinkan untuk mewujudkan sistem Rem Belakang yang halus dan dapat dikontrol..
This rear master cylinder is designed to prevent fluid leakage by tightening the banjo bolt directly into the thread without the use of a hose adapter. When replacing the rear caliper with an opposed 2-piston caliper (Φ32 or Φ34) made by GALE SPEED or brembo, depending on the ratio, the brake pedal stroke width may decrease, making it difficult to control. The GALE SPEED rear master cylinder has a piston diameter of Φ12 and is designed to match the lever ratio of a typical racing step. This allows for a sensitive and controllable rear braking system.
Race-specific products Rear master cylinder for thumb brake Threading (M10 x 1.0) on the reserve tank mounting section allows direct connection of a banjo bolt.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
* Ukuran pitch/baut pemasangan: 40mm atau 49mm/M6, 40mm atau 49mm dapat digunakan dengan mengubah bagian atas dan bawah braket pemasangan. * Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*The product in the image may differ from the actual product. *Used in combination with thumb brake master. *Nipples are not included. *Dimensions are the same as those of the standard product. *Mounting pitch / bolt size40mm or 49mm can be used with either 40mm or 49mm mounting pitch by replacing the top and bottom of the attaching bracket. *The main body is coated with durable "hard anodized aluminum".Unlike ordinary colored anodized aluminum, this product features a natural color finish.Therefore, the color tone may vary from that in the photo depending on various conditions.We do not accept returns or exchanges due to color tone. *There may be changes in product specifications due to the manufacturer's reasons.
