Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Chain CoverBracket pemrosesan tambahan sebagai standar
Selesai Tubuh: Finishing Hitam Semigloss
Bahan ・Pipa utama: Bahan Ultra Duralumin 7N01/Penampang persegi tiga Rantai Tarik Dept.:Bahan A5083/OWType
Spec. [Pipa utama] Persegi Tiga Panjang 95mm, lebar 40mm, tebal 2,5mm [Bagian pivot] Bagian Cut-out/Pivot dilengkapi dengan ball bearing + needle bearing [Adjuster Rantai] OWType [Sesuaikan rentang] 20mm hingga +40mm dibandingkan dengan OEM [Poros Poros] diameter poros terpasang 20mm [Rem] Korespondensi OEM [Roda] Korespondensi OEM Additional chain cover brackets are standard
Body Finish: Semi-gloss black finish
materials ・Main pipe: Super duralumin 7N01 material/deformed figure of merit cross section (triple square) ・Chain puller: A5083 material / OW type
Specification [Main Pipe] Triple square cross section ・95mm in length, 40mm in width, 2.5mm in thickness [Pivot section] machined, Pivot section has ball bearings + needle bearings [Chain adjuster] OW type [Adjustment range] 20mm to +40mm compared to stock [Axle shaft] included, Shaft diameter 20mm [Brake] Stock compatible [Wheel] Stock compatible
Catatan
* Produk ini dibuat berdasarkan pesanan. Kami akan mengonfirmasi waktu pengiriman setelah pesanan diterima.t berbeda dengan aslinya.
Peringatan
*Beberapa pilihan (perubahan panjang keseluruhan, lebar gandar, posisi penyangga suspensi, posisi penyangga slot torsi, spesifikasi tangki penampung oli) dikecualikan dari opsi di Webike. * Harap pastikan untuk mengamankan jarak bebas antara rantai dan lengan ayun saat mengganti sproket atau ketinggian kendaraan, dan harap berhati-hati terhadap interferensi. *Kombinasi dengan stock step dan stock muffler belum dicoba. Lengan ayun lebih lebar dari lengan ayun stok, sehingga ada kemungkinan gangguan. *Karena alasan desain, posisi penahan penutup rantai opsional mungkin berbeda dari posisi pabrik. * Ada kasus yang berisi jenis lain di foto. * Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*Some options (change of overall length, axle width, suspension support position, torque slot support position, oil catch tank specification) are excluded from the options on Webike. *When replacing the sprocket or changing the ride height, be careful to keep the clearance between the chain and the swingarm. *Combination with stock step and stock exhaust has not been tested.The swingarm member is wider than the stock and may interfere with the swingarm. *Due to design reasons, the optional chain cover bracket position may differ from the stock position. *The image may contain other types. *There may be changes in product specifications due to the manufacturer's reasons.
