- Beranda
- Motor
- KAWASAKI 751 - 1000cc
- GPZ900R Ninja
- Sparepart Motor
- Knalpot
- Knalpot Full System
- NITRO RACING
- NITRO RACING: Knalpot Full System 4in1 3D Titanium Weld EX
Knalpot Full System 4in1 3D Titanium Weld EX
- Nomor produk: EX-04WTUGT3-V1
-
- IN STOCK
- Out Stock
- NITRO RACING
- |
- 0.0
- (0 ulasan)
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
GPZ900R (Ninja)
GPZ750R
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Ukuran silencer] 300mm
[Spesifikasi]
Bahan pipa knalpot: Titanium
Diameter pipa knalpot: Φ42.7
Diameter luar tail pipe: Φ60.5
[Kondisi saat dipasang]
Tidak bersinggungan dengan baut pembuangan oli.
Manifold harus dilepas jika ingin mengganti filter oli.
Tidak memungkinkan pemasangan standar tengah.
[Isi]
•1 unit pipa knalpot
•Rangkaian produk-produk yang diperlukan untuk pemasangan
•Tail pipe
•8 per
Silencer
•Peredam knalpot
•Klem silencer
•Bracket silencer
[Silencer size] 300mm
[Specification]
Exhaust pipe material: Titanium
Exhaust pipe diameter: Φ42.7
Tail pipe outer diameter: Φ60.5
[Condition when installed]
Drain bolt: accessible
Oil filter change: Manifold section needs to be detached
Center stand: not allowed
[Components]
・Exhaust pipe per vehicle
・Assembly part
・Tailpipe
・8 springs
Silencer
・End baffle
・Silencer band
・Silencer Bracket
[Spesifikasi]
Bahan pipa knalpot: Titanium
Diameter pipa knalpot: Φ42.7
Diameter luar tail pipe: Φ60.5
[Kondisi saat dipasang]
Tidak bersinggungan dengan baut pembuangan oli.
Manifold harus dilepas jika ingin mengganti filter oli.
Tidak memungkinkan pemasangan standar tengah.
[Isi]
•1 unit pipa knalpot
•Rangkaian produk-produk yang diperlukan untuk pemasangan
•Tail pipe
•8 per
Silencer
•Peredam knalpot
•Klem silencer
•Bracket silencer
[Silencer size] 300mm
[Specification]
Exhaust pipe material: Titanium
Exhaust pipe diameter: Φ42.7
Tail pipe outer diameter: Φ60.5
[Condition when installed]
Drain bolt: accessible
Oil filter change: Manifold section needs to be detached
Center stand: not allowed
[Components]
・Exhaust pipe per vehicle
・Assembly part
・Tailpipe
・8 springs
Silencer
・End baffle
・Silencer band
・Silencer Bracket
[Deskripsi]
• R. C. WELDEXSeries dirancang khusus untuk M
NITRO RACING Weld craft3DTitaniumEXSeries terdiri dari lebih dari 100 potongan pipa yang disatukan dengan susah payah untuk meminimalkan distorsi sekecil apa pun dalam proses pembengkokan..
Merupakan komitmen terhadap kebulatan yang mengutamakan efisiensi pembuangan tanpa memperhatikan biaya..
Pembersihan jalan, dan sudut tepian, bukti bahwa kami mengejar elemen yang diperlukan untuk sistem pembuangan..
Spring lock Flange eksklusif untuk Cut-out.
Semua untuk mesin terbaik.. ■Weld EX series designed exclusively for R.C.M
The NITRO RACING Weldcraft 3D Titanium EX Series is made by painstakingly joining over 100 pieces of pipe to minimize the slightest distortion in the bending process.
It is a commitment to roundness that prioritizes exhaust efficiency without regard to cost.
The road clearance and bank angle are proof of the pursuit of the elements required for a exhaust.
Specially machined spring locking flange.
All for the best machine.
NITRO RACING Weld craft3DTitaniumEXSeries terdiri dari lebih dari 100 potongan pipa yang disatukan dengan susah payah untuk meminimalkan distorsi sekecil apa pun dalam proses pembengkokan..
Merupakan komitmen terhadap kebulatan yang mengutamakan efisiensi pembuangan tanpa memperhatikan biaya..
Pembersihan jalan, dan sudut tepian, bukti bahwa kami mengejar elemen yang diperlukan untuk sistem pembuangan..
Spring lock Flange eksklusif untuk Cut-out.
Semua untuk mesin terbaik.. ■Weld EX series designed exclusively for R.C.M
The NITRO RACING Weldcraft 3D Titanium EX Series is made by painstakingly joining over 100 pieces of pipe to minimize the slightest distortion in the bending process.
It is a commitment to roundness that prioritizes exhaust efficiency without regard to cost.
The road clearance and bank angle are proof of the pursuit of the elements required for a exhaust.
Specially machined spring locking flange.
All for the best machine.
Catatan
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
[JMCA tidak bersertifikat]
*Muffler yang tidak bersertifikat JMCA mungkin tidak cocok untuk pemeriksaan kendaraan atau penggunaan jalan umum.
* Penyekat ujung sudah dipasang pada peredam selama pengiriman.
* Tidak mengandung tali peredam karena braket dipasang pada peredam berbentuk kerucut titanium V-1 / V-2 / V-3.
* Anda harus mengganti ke set belakang tipe tunggal atau memotong bagian pembonceng pada footpeg STD.
* Silakan gunakan flensa normal saat memasang.
*NITRO RACING Tandem Step KIT Hanya tersedia untuk Short Tail. (Tipe 1 tidak dapat dipasang)
* Mungkin perlu mengganti penutup mata tergantung pada jenis penutup mata.
* Penahan peredam dirancang untuk memungkinkan pemasangan tangki reservoir kejut OHLINS R.
*Saat mengganti dari NITRO RACING OIL COOLER HIGH MOUNT KIT dan titanium full EX yang dibengkokkan mesin ke produk ini, panjang, sambungan, dll selang oil cooler perlu dibuat baru. sesuai kendaraan.
* Berisi warna / jenis lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*It is necessary to change to a single type rearset or cut off the pillion part of the stock step.
*For installation, use a stock flange.It is not included in the KIT.
*NITRO RACING Pillion Step KIT Only available for Short Tail.(Type 1 cannot be installed)
*You may need to replace the blinkers depending on the type of blinker.
*The silencer bracket is designed to allow installation of an OHLINS rear shock reservoir tank.
*When changing from Nitro Racing Oil Cooler High Mount Kit and Machine Bent Titanium Full Exhaust to this product, it is necessary to change the oil cooler hose length and fitting according to the bike.
*Images contain other colors and types.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
*Muffler yang tidak bersertifikat JMCA mungkin tidak cocok untuk pemeriksaan kendaraan atau penggunaan jalan umum.
* Penyekat ujung sudah dipasang pada peredam selama pengiriman.
* Tidak mengandung tali peredam karena braket dipasang pada peredam berbentuk kerucut titanium V-1 / V-2 / V-3.
* Anda harus mengganti ke set belakang tipe tunggal atau memotong bagian pembonceng pada footpeg STD.
* Silakan gunakan flensa normal saat memasang.
*NITRO RACING Tandem Step KIT Hanya tersedia untuk Short Tail. (Tipe 1 tidak dapat dipasang)
* Mungkin perlu mengganti penutup mata tergantung pada jenis penutup mata.
* Penahan peredam dirancang untuk memungkinkan pemasangan tangki reservoir kejut OHLINS R.
*Saat mengganti dari NITRO RACING OIL COOLER HIGH MOUNT KIT dan titanium full EX yang dibengkokkan mesin ke produk ini, panjang, sambungan, dll selang oil cooler perlu dibuat baru. sesuai kendaraan.
* Berisi warna / jenis lain di foto.
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
*The end baffle is pre-installed on the silencer at the time of shipment.
*Conical titanium silencers V-1 / V-2 / V-3 do not come with a silencer band as a bracket is pre-installed.
*It is necessary to change to a single type rearset or cut off the pillion part of the stock step.
*For installation, use a stock flange.It is not included in the KIT.
*NITRO RACING Pillion Step KIT Only available for Short Tail.(Type 1 cannot be installed)
*You may need to replace the blinkers depending on the type of blinker.
*The silencer bracket is designed to allow installation of an OHLINS rear shock reservoir tank.
*When changing from Nitro Racing Oil Cooler High Mount Kit and Machine Bent Titanium Full Exhaust to this product, it is necessary to change the oil cooler hose length and fitting according to the bike.
*Images contain other colors and types.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model yang Sesuai
GPZ900R (Ninja)
GPZ750R
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/