Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Universal
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Tipe coil
[Bahan]
Zinc alloy, PA resin, GF, iron, PVC
[Ukuran]
100.5 (H) x 76.5 (W) x 32.4 (D) mm
Kabel 1000mm
[Isi]
Body x 1
Spacer x 4
Washer x 2
Baut cap x 2
Reset pin x 1
Baut M6 x 40mm x 2
Baut M6 x 55mm x 2
[Bahan]
Zinc alloy, PA resin, GF, iron, PVC
[Ukuran]
100.5 (H) x 76.5 (W) x 32.4 (D) mm
Kabel 1000mm
[Isi]
Body x 1
Spacer x 4
Washer x 2
Baut cap x 2
Reset pin x 1
Baut M6 x 40mm x 2
Baut M6 x 55mm x 2
[Deskripsi]
[Easy, safe, and fast because it is handlebar-mounted!]]
Simply extend the wire and thread it through the helmet for easy locking.
It locks quickly and allows you to leave the bike immediately and safely.
Coil wire type for easy storage and installation.
[Coiled wire lock]
The dial lock (3-digit) system eliminates the need to carry a key for locking!
Simply pull the lock out from the handlebar position.
Simply extend the wire and thread it through the helmet for easy locking.
It locks quickly and allows you to leave the bike immediately and safely.
Coil wire type for easy storage and installation.
[Coiled wire lock]
The dial lock (3-digit) system eliminates the need to carry a key for locking!
Simply pull the lock out from the handlebar position.
Peringatan
*This product is a lock for helmets.Not for use with anything but helmets.
*Images may contain other products and colors.
*There may be changes in product specifications due to the manufacturer's reasons.
[Installation Requirements]
*The lever holder screws must be secured with two M6 bolts.
*The bolt alignment should be vertical and between 32mm - 35mm.
*There must be space for a helmet to be placed stably.
[Cautions for installation]
*Do not interfere with surrounding master cylinders, switches.
*Do not interfere with the tank or cowl when turning the handlebars.
*Images may contain other products and colors.
*There may be changes in product specifications due to the manufacturer's reasons.
[Installation Requirements]
*The lever holder screws must be secured with two M6 bolts.
*The bolt alignment should be vertical and between 32mm - 35mm.
*There must be space for a helmet to be placed stably.
[Cautions for installation]
*Do not interfere with surrounding master cylinders, switches.
*Do not interfere with the tank or cowl when turning the handlebars.
Model yang Sesuai
Universal
