Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Tipe lowdown] Sekitar 30mm
[Part number per] 1746
[Nomor oli shock depan/tingkat oli] SAE 10 / 180mm
[Setelan preload] Tanpa setelan
[Sag value] 65mm
[Setelan kompresi] Tanpa setelan
[Setelan rebound] Tanpa setelan
[Catatan setelan] Lepas spacer 100mm bawaan dan pasang.
[Part number per] 1746
[Nomor oli shock depan/tingkat oli] SAE 10 / 180mm
[Setelan preload] Tanpa setelan
[Sag value] 65mm
[Setelan kompresi] Tanpa setelan
[Setelan rebound] Tanpa setelan
[Catatan setelan] Lepas spacer 100mm bawaan dan pasang.
[Deskripsi]
■Front Spring
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs impact and holds firm at the back.
The front springs are supplied with the required amount of fork oil.
Hyperpro's unique low down spring that lowers the vehicle height by changing the rate and adjusting the oil level without changing the free length of the spring.
Enjoy the smooth ride of the Constant Rising Rate, which flexibly absorbs impact and holds firm at the back.
The front springs are supplied with the required amount of fork oil.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
*If the bike is lowered by more than 30mm, a short side stand may be required depending on the condition of the bike.If your vehicle is equipped with a preload adjuster, adjust the lowering to a level where the side stand can be used.
*When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.
*The product in the image may differ from the actual product.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*When using the side stand, stop the vehicle on a level surface in first gear.(Because of the lowering, the body will be raised more than stock)
*After installation, the balance of the vehicle body will be greatly changed.Be sure to to set the front and rear settings before riding.
*The product in the image may differ from the actual product.
*The image may include other products.
*There may be changes in product specifications due to the manufacturer's reasons.
