Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
MONKEY 12V(Z50J-2000001-/AB27-1000001-1899999)
GORILLA 12V(Z50J-2000001-/AB27-1000001-1899999)
MONKEY (FI)
MONKEY BAJA (All models)
MONKEY R (All models)
MONKEY RT (All models)
MAGNA50 (AC13-1000010-)
CD50 (CD50-1500001-)
CL50 (CD50-4000001-)
Benly50S (CD50-2200005-)
CD90 (HA03-1100005-)
JAZZ (AC09-1000030-)
DAX50 12V(AB26-1000001-)■Vehicles that can be installed by installing SP Takekawa's special clutch kit
XR50R (AE03-1000001-)■Vehicles that can be installed by installing SP Takekawa's special clutch kit
CRF50F (AE03-1400001-)■Vehicles that can be installed by installing SP Takekawa's special clutch kit
CRF70F (DE02-1700001-)■Vehicles that can be installed by installing SP Mukawa's special clutch kit
XR70R (DE02-1000001-)■Vehicles that can be installed by installing SP Mukawa's special clutch kit
Tampilkan lebih banyak
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Dengan relief valve
Bisa untuk motor kopling sentrifugal dan manual.
Bisa untuk motor kopling sentrifugal dan manual.
[Deskripsi]
Super Oil Pump Kit (with relief valve function) that employs a relief valve function in the pump body to find the optimum oil discharge volume.
Part Number: 01-16-0071 comes with a tool for processing the orifice section of the crankcase (drill driver: 2MM).
SP Takegawa uses about 1.8 times more oil than stock to ensure that the amount of oil pumped to each part of the engine, the oil pressure, and the oil level in each part is appropriate.
Circulation of the proper amount of oil reduces the burden on parts in the drive unit, improves cooling performance, and secures the oil film on lubricated parts.
Furthermore, by incorporating a relief valve function in the oil pump body, hydraulic pressure can be controlled, reducing the burden on the engine caused by increased hydraulic pressure and ensuring stable oil circulation.
■Essential item for bikes with high spec engines
In the case of a high-specification engine with SP Takegawa cylinder head, the oil level may not be stable due to frequent use in the high-rpm range, which may cause air biting.
By installing this product, the oil level is stabilized even in the high RPM range, which reduces power loss and allows the engine performance to be fully demonstrated.
■Adoption of relief valve function for hydraulic control
The SP Takegawa Super Oil Pump increases the discharge volume by approximately 1.8 times compared to the stock pump. To address changes in oil pressure during unstable idling and with the increase in rotation, a relief valve function is installed. This valve opens only when a certain oil pressure is reached in the oil line, ensuring stable oil pressure during idle and accommodating changes in pressure during acceleration.
This suppresses excessive hydraulic pressure rise during cold run-up and prevents damage to the drive and seals.
Furthermore, when the engine is running at high RPM, it does not discharge more oil than necessary, reducing power loss and stabilizing the oil level.
■Easy installation by simply replacing the stock oil pump.
This product can be easily installed by simply replacing the stock oil pump without the need to divert, disassemble, or assemble the stock oil pump.
The kit also includes gaskets and fixing screws, so there is no need to reuse stock parts or check for wear and tear, and new parts can be used.
Part Number: 01-16-0071 comes with a tool for processing the orifice section of the crankcase (drill driver: 2MM).
SP Takegawa uses about 1.8 times more oil than stock to ensure that the amount of oil pumped to each part of the engine, the oil pressure, and the oil level in each part is appropriate.
Circulation of the proper amount of oil reduces the burden on parts in the drive unit, improves cooling performance, and secures the oil film on lubricated parts.
Furthermore, by incorporating a relief valve function in the oil pump body, hydraulic pressure can be controlled, reducing the burden on the engine caused by increased hydraulic pressure and ensuring stable oil circulation.
■Essential item for bikes with high spec engines
In the case of a high-specification engine with SP Takegawa cylinder head, the oil level may not be stable due to frequent use in the high-rpm range, which may cause air biting.
By installing this product, the oil level is stabilized even in the high RPM range, which reduces power loss and allows the engine performance to be fully demonstrated.
■Adoption of relief valve function for hydraulic control
The SP Takegawa Super Oil Pump increases the discharge volume by approximately 1.8 times compared to the stock pump. To address changes in oil pressure during unstable idling and with the increase in rotation, a relief valve function is installed. This valve opens only when a certain oil pressure is reached in the oil line, ensuring stable oil pressure during idle and accommodating changes in pressure during acceleration.
This suppresses excessive hydraulic pressure rise during cold run-up and prevents damage to the drive and seals.
Furthermore, when the engine is running at high RPM, it does not discharge more oil than necessary, reducing power loss and stabilizing the oil level.
■Easy installation by simply replacing the stock oil pump.
This product can be easily installed by simply replacing the stock oil pump without the need to divert, disassemble, or assemble the stock oil pump.
The kit also includes gaskets and fixing screws, so there is no need to reuse stock parts or check for wear and tear, and new parts can be used.
Peringatan
*Cannot be installed on centrifugal clutch bikes other than the compatible bike (Cub 100EX) because of interference.
*The orifice part of the crankcase must be machined.(Processing method is described in the instruction manual.)
*Cannot be installed at the same time as SP Takegawa's old type special clutch kit (without oil filter mounting area) because it interferes with the clutch.
*R. Crankcase cover gasket is not included.Please purchase separately as it is required for replacement.The shape of the gasket varies depending on the bike.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*The orifice part of the crankcase must be machined.(Processing method is described in the instruction manual.)
*Cannot be installed at the same time as SP Takegawa's old type special clutch kit (without oil filter mounting area) because it interferes with the clutch.
*R. Crankcase cover gasket is not included.Please purchase separately as it is required for replacement.The shape of the gasket varies depending on the bike.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
MONKEY 12V(Z50J-2000001-/AB27-1000001-1899999)
GORILLA 12V(Z50J-2000001-/AB27-1000001-1899999)
MONKEY (FI)
MONKEY BAJA (All models)
MONKEY R (All models)
MONKEY RT (All models)
MAGNA50 (AC13-1000010-)
CD50 (CD50-1500001-)
CL50 (CD50-4000001-)
Benly50S (CD50-2200005-)
CD90 (HA03-1100005-)
JAZZ (AC09-1000030-)
DAX50 12V(AB26-1000001-)■Vehicles that can be installed by installing SP Takekawa's special clutch kit
XR50R (AE03-1000001-)■Vehicles that can be installed by installing SP Takekawa's special clutch kit
CRF50F (AE03-1400001-)■Vehicles that can be installed by installing SP Takekawa's special clutch kit
CRF70F (DE02-1700001-)■Vehicles that can be installed by installing SP Mukawa's special clutch kit
XR70R (DE02-1000001-)■Vehicles that can be installed by installing SP Mukawa's special clutch kit
Tampilkan lebih banyak
