- Beranda
- Motor
- BMW 1001cc -
- R1200GS
- Sparepart Motor
- Rangka
- Dudukan / Sambungan Standar Samping
- r's gear
- r's gear: Stand Height Bracket TYPE2
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
R1200GS 05-12
R1200GS-ADV 06-13
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Bahan]
duralumin
[Spek]
Black Anodized Aluminum
Cutting Logo
[Spek]
Tinggi naik 15mm
Lebih besar 1, 5 kali dari standar
[Material]
duralumin
[Specification]
Black Anodized Aluminum
Cutting Logo
[Specifications]
Height increased by approx. 15mm
Approx. 1.5 times larger in area
duralumin
[Spek]
Black Anodized Aluminum
Cutting Logo
[Spek]
Tinggi naik 15mm
Lebih besar 1, 5 kali dari standar
[Material]
duralumin
[Specification]
Black Anodized Aluminum
Cutting Logo
[Specifications]
Height increased by approx. 15mm
Approx. 1.5 times larger in area
[Deskripsi]
As the side stand is being used, it reduces the leaning of the vehicle and improves the handling of the vehicle.
This also increases the ground contact area of the stand, preventing the side stand from sticking into the ground when the vehicle is parked on a soft surface.
The height is about 15mm higher than stock.
Made of machined duralumin, black anodized finish.
As the side stand is being used, it reduces the leaning of the vehicle and improves the handling of the vehicle.
This also increases the ground contact area of the stand, preventing the side stand from sticking into the ground when the vehicle is parked on a soft surface.
The height is about 15mm higher than stock.
Made of machined duralumin, black anodized finish.
This also increases the ground contact area of the stand, preventing the side stand from sticking into the ground when the vehicle is parked on a soft surface.
The height is about 15mm higher than stock.
Made of machined duralumin, black anodized finish.
As the side stand is being used, it reduces the leaning of the vehicle and improves the handling of the vehicle.
This also increases the ground contact area of the stand, preventing the side stand from sticking into the ground when the vehicle is parked on a soft surface.
The height is about 15mm higher than stock.
Made of machined duralumin, black anodized finish.
Peringatan
*R1200GS ('13-'15), R1200GS-ADV ('14-'15) Cannot be installed.
*When installing on R1200GS ('04), processing may be necessary if there are burrs or other irregularities on the side stand plate.(Cannot be installed on EU specs)
*Cannot be installed on lowered bikes.
*There may be changes in product specifications due to the manufacturer's reasons.
*R1200GS ('13-'15), R1200GS-ADV ('14-'15) Cannot be installed.
*When installing on R1200GS ('04), processing may be necessary if there are burrs or other irregularities on the side stand plate.(Cannot be installed on EU specs)
*Cannot be installed on lowered bikes.
*There may be changes in product specifications due to the manufacturer's reasons.
*When installing on R1200GS ('04), processing may be necessary if there are burrs or other irregularities on the side stand plate.(Cannot be installed on EU specs)
*Cannot be installed on lowered bikes.
*There may be changes in product specifications due to the manufacturer's reasons.
*R1200GS ('13-'15), R1200GS-ADV ('14-'15) Cannot be installed.
*When installing on R1200GS ('04), processing may be necessary if there are burrs or other irregularities on the side stand plate.(Cannot be installed on EU specs)
*Cannot be installed on lowered bikes.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
R1200GS 05-12
R1200GS-ADV 06-13
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/