Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
Rectangular, Iwata City, etc., moped & moped license plate numbers are available.
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Japan
[Deskripsi]
You may notice that numbers are sometimes bent, right?.
This product was born from such reQuest!.
Protects the number while subtly dress-up with a matte texture.
When the number is attached, a frame of about 5mm in Material:Carbon Style is formed around the perimeter..
Material:Twill Weave Carbon pattern, Flat on the reverse side
Uses AES resin with high weather resistance.
This product was born from such reQuest!.
Protects the number while subtly dress-up with a matte texture.
When the number is attached, a frame of about 5mm in Material:Carbon Style is formed around the perimeter..
Material:Twill Weave Carbon pattern, Flat on the reverse side
Uses AES resin with high weather resistance.
Peringatan
*Each piece is 5mm larger than the size of the number.
*Depending on the car model, it may not be able to be installed due to interference with the car body.
*Because the plate is 3mm thick, it is necessary to prepare longer mounting bolts depending on the car model.
*The washers and sponges included in this product are to prevent interference between this product and the license plate and to prevent deformation of the license plate. Use the washer and sponge between the license plate and this product.
*The installation should be done properly by experienced and knowledgeable persons.
*There is some room in the mounting holes for the parts. Please install the parts evenly, balancing left/right and top/bottom.
*There are cases that it contains other product in the photo.
*Please note that the product specification may change due to manufacturer reasons.
*Depending on the car model, it may not be able to be installed due to interference with the car body.
*Because the plate is 3mm thick, it is necessary to prepare longer mounting bolts depending on the car model.
*The washers and sponges included in this product are to prevent interference between this product and the license plate and to prevent deformation of the license plate. Use the washer and sponge between the license plate and this product.
*The installation should be done properly by experienced and knowledgeable persons.
*There is some room in the mounting holes for the parts. Please install the parts evenly, balancing left/right and top/bottom.
*There are cases that it contains other product in the photo.
*Please note that the product specification may change due to manufacturer reasons.
Model yang Sesuai
Rectangular, Iwata City, etc., moped & moped license plate numbers are available.
