Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat Semua
F4 1000S TAMBURINI 04-06 [part used]Front
BRUTALE S910 06-08 [Used in]Front
F4 1000S MAMBA 04-06 [part used]Front
F4S 99-03 [Used in]Front
F4 1000S CORSE 04-06 [part used]Front
F4 99-03 [Used in]Front
BRUTALE910 06-08 [Used in]Front
F4 SPR 99-03 [Used in]Front
BRUTALE750 01-05 [Used point]Front
F4 AGO 99-03 [Used in]Front
F4 1000S 04-06 [part used]Front
BRUTALE S750 01-05 [Used point]Front
Tampilkan lebih banyak
CB1300SF 98-00 SC40 [location of use]Front
THUNDER BOLT S3 99-01 S3T [location of use]Front
CYCLONE M2 99-01 BUELL M2 [location of use]Front
LIGHTNING X1 99-01 BUELL X1 [location of use]Front
Tampilkan lebih banyak
NINJA ZX-7RR 96-00 ZX750N,JKAZXDN1[location of use]Front
Rincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Quantity] 1
[Deskripsi]
・NISSIN semi-metallic brake pads for touring/street use
・Brake pads that not only offer high braking power but also high controllability, and all performance is balanced to a high dimension
・Stable braking power in a variety of environments, including low to high temperatures, dry and wet road surfaces, etc.
・Mild initial touch, effective at the back, and easy-to-use control characteristics
・ECE R90 certification (European quality standard) Various tests and evaluations ensure high quality and safety
NISSIN Premium Pads - Semi-metal -
Uses newly developed brake friction material designed for touring and street use
1) Braking power: Development of a brake friction material with a μ (coefficient of friction) equivalent to or higher than that of Nissin's conventional semi-metallic material.
2) Controllability/abrasion resistance: Stable braking performance even in high temperature and wet conditions for touring and on the street.
In addition, it is highly abrasion resistant and economical.
3) ECE R90 certification: Newly acquired ECE R90, the quality standard for brake pads in Europe, ensuring high performance and safety through various tests and evaluations.
・Brake pads that not only offer high braking power but also high controllability, and all performance is balanced to a high dimension
・Stable braking power in a variety of environments, including low to high temperatures, dry and wet road surfaces, etc.
・Mild initial touch, effective at the back, and easy-to-use control characteristics
・ECE R90 certification (European quality standard) Various tests and evaluations ensure high quality and safety
NISSIN Premium Pads - Semi-metal -
Uses newly developed brake friction material designed for touring and street use
1) Braking power: Development of a brake friction material with a μ (coefficient of friction) equivalent to or higher than that of Nissin's conventional semi-metallic material.
2) Controllability/abrasion resistance: Stable braking performance even in high temperature and wet conditions for touring and on the street.
In addition, it is highly abrasion resistant and economical.
3) ECE R90 certification: Newly acquired ECE R90, the quality standard for brake pads in Europe, ensuring high performance and safety through various tests and evaluations.
Peringatan
*There are products of different thicknesses and similar shapes, so please make sure to check the compatible models and shapes before purchase.
*Daily and periodic inspections must be carried out, and the product should be replaced when the abrasive surface thickness reaches 2mm.
*Be careful not to get any oil or impurities on the brake pad abrasive surfaces or disc rotors.
*After replacing the brake pads, please ride carefully for 100-200km under normal conditions, as the brake pads need to acclimate to the disc rotors.
*Be sure to replace all the pads for one set of calipers for a single disc and for two sets of calipers for a double disc.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
*Daily and periodic inspections must be carried out, and the product should be replaced when the abrasive surface thickness reaches 2mm.
*Be careful not to get any oil or impurities on the brake pad abrasive surfaces or disc rotors.
*After replacing the brake pads, please ride carefully for 100-200km under normal conditions, as the brake pads need to acclimate to the disc rotors.
*Be sure to replace all the pads for one set of calipers for a single disc and for two sets of calipers for a double disc.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
Model yang Sesuai
F4 1000S TAMBURINI 04-06 [part used]Front
BRUTALE S910 06-08 [Used in]Front
F4 1000S MAMBA 04-06 [part used]Front
F4S 99-03 [Used in]Front
F4 1000S CORSE 04-06 [part used]Front
F4 99-03 [Used in]Front
BRUTALE910 06-08 [Used in]Front
F4 SPR 99-03 [Used in]Front
BRUTALE750 01-05 [Used point]Front
F4 AGO 99-03 [Used in]Front
F4 1000S 04-06 [part used]Front
BRUTALE S750 01-05 [Used point]Front
Tampilkan lebih banyak
CB1300SF 98-00 SC40 [location of use]Front
THUNDER BOLT S3 99-01 S3T [location of use]Front
CYCLONE M2 99-01 BUELL M2 [location of use]Front
LIGHTNING X1 99-01 BUELL X1 [location of use]Front
Tampilkan lebih banyak
NINJA ZX-7RR 96-00 ZX750N,JKAZXDN1[location of use]Front
