- Beranda
- Motor
- KAWASAKI 51 - 125cc
- D-TRACKER125
- Sparepart Motor
- Bodywork
- Spakbor
- Fender Eliminator
- A-TECH
- A-TECH: Satu Set Tail Tidy
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
[Bahan] FRP
[Warna] Hitam
[Material] FRP
[Color] Black
[Warna] Hitam
[Material] FRP
[Color] Black
[Deskripsi]
Itu memungkinkan untuk menerima pembuangan dari sistem pembuangan ke bawah sambil menunjukkan dengan jelas ke sekeliling bagian belakang.
The rear of the vehicle is made to look neat and clean, and the exhaust of the exhaust is made to flow downward.
Catatan
* Produk ini dibuat berdasarkan pesanan. Kami akan mengonfirmasi waktu pengiriman setelah pesanan diterima.t berbeda dengan aslinya.
* Setelah dipesan, produk ini tidak dapat dibatalkan, dikembalikan, atau ditukar.
Peringatan
* Produk pada foto # 1 adalah D-TRACER125 Mounted Sample.
* Produk pada foto # 2 adalah KLX125 Mounted Sample.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*Image 1 is an example of D-TRACER125 installation.
*Image 2 is an example of KLX125 installation.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
* Produk pada foto # 2 adalah KLX125 Mounted Sample.
* Harap perhatikan sebelumnya bahwa pembatalan dan / atau pengembalian produk ini tidak dapat diterima setelah pesanan telah ditempatkan. *As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*Image 1 is an example of D-TRACER125 installation.
*Image 2 is an example of KLX125 installation.
*There may be changes in product specifications due to the manufacturer's reasons.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/