|Kapasitas Tangki||17 Liter|
I used this product for MATE 50.
Rear Carrier has harvest boxes of classic farmers but it can be used without turning up.
Rainwater does not seep so far, and the work on Motorcycle is also Large It is not strange.
I am a bit worried that the cloth is very much PePera, but there is only it to see the situation.
Got this for the PCX rear clutch large nut. Good quality product but too shallow once your torque wrench/ratchet is inserted because of the threads that protude from the shaft. I was able to get it to work by withdrawing the 1/2" square drive a little so the socket shoulders would engage the nut flats, nonetheless its a flaw at least in regard to this application.
Image is Right Side is Master cylinderLever of Nisshin so it is 10 mm from 8 mm OEM.
The diameter of Mirror is also Large Tiny, Small is not too much Simple, I think that Pipe stay part is Black as well and I think that it is becoming KSR in a tight atmosphere.
Outer part and Inner (Mirror part) And I think that visibility is good because the adjustment range is wide because three parts of Bracket root, Mirror side root, Mirror and Outer part can move.. Outer and Inner (Silver Partial) There is no problem because the movable amount of Large is not so big, but other moves.
When running, there is a shake in my KSR. If we attach Weight on the inner side of the Bar End etc., the blurring may be solved a bit. It's not just feeling too cruel.
If you do not change Clutch or Brake lever, you need to change to 8 mm Type, change to 10 mm Type if you change.
https : / / www. webike. net / sd / 20365709 /
I think that the atmosphere can be confirmed because Right Side of the image is Mirror of Madmax and Left Side is OEM.
Both of the last one are from Madmax.
I am satisfied because Simple is cool and the price is cheap.
DAYTONA 's Clutch lock nut socket looked very similar and I purchased it accidentally.
Try to deliver the item, before opening it "Huh?" I think.
I did not notice it in the picture of Net,
The real thing is that the hole of the Socket is 2 to 3 mm recessed one step
When trying to loosen Scooter's thin Clutch nut of about 4 mm
There is a gap in the hole of Socket where Nut and Nut are engaged, and it does not mesh well
(Feeling that I tried matching the real Nut).
If you use it as a socket to relax the thin Nut of for Clutch,
(I am sorry in a tough way of speaking) This gap is fatal, but what is it?.
If you try to loosen the hard Nut of a real car, you are likely to lick Nut.
This time it was before opening the product, so I'm thinking if I can return it.
I will rebuild to DAYTONA's Clutch lock nut socket