- Beranda
- Motor
- HONDA 51 - 125cc
- MSX125 (GROM)
- Sparepart Motor
- Bodywork
- Spakbor
- Spakbor Depan
- SOLID UP
- SOLID UP: Spakbor Depan
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Bahan: Plain weave carbon (Terbuat dari CFRP) Clear gel coat finish
Termasuk: Set baut x 1 Material: Plain weave carbon (made of CFRP) Clear gel coat finish
Components: Front side mounting bolt set x 1
Termasuk: Set baut x 1 Material: Plain weave carbon (made of CFRP) Clear gel coat finish
Components: Front side mounting bolt set x 1
[Deskripsi]
Ini adalah spatbor depan setengah tipe dengan ujung spatbor tajam yang menjaga ketinggian serendah mungkin sambil menyisakan area minimum untuk menghindari batu loncatan ke dalam garpu depan.
[Metode pemasangan]
Ini diganti dengan spatbor depan OEM.
Sisi depan dilengkapi dengan baut, dan sisi belakang dipasang dengan menggunakan grommet OEM. This half-type front fender is designed to minimize the height of the fender and to sharpen the tip of the fender, leaving the minimum area to avoid flying rocks into the inner part of the front fork.
[How to install]
・Replace with stock front fender.
・Use the supplied bolts for the front side, and use the stock bolt grommets for the rear side.
[Metode pemasangan]
Ini diganti dengan spatbor depan OEM.
Sisi depan dilengkapi dengan baut, dan sisi belakang dipasang dengan menggunakan grommet OEM. This half-type front fender is designed to minimize the height of the fender and to sharpen the tip of the fender, leaving the minimum area to avoid flying rocks into the inner part of the front fork.
[How to install]
・Replace with stock front fender.
・Use the supplied bolts for the front side, and use the stock bolt grommets for the rear side.
Catatan
Pilihan warna lainnya di sini.
Other colorings are here.
Peringatan
*Disarankan untuk dilapisi dulu dengan cat urethane 2 lapis untuk mencegah produk menguning karena terpapar sinar matahari.
*Posisi lampu sein harus diubah. *Cannot be installed on JC92 (model).
*This is the clear gel coat finish of the carbon, but recommending you to paint with 2-part urethane clear before installation to prevent discoloration (yellowing) in sunlight.
*The position of the blinker needs to be changed.
*There may be changes in product specifications due to the manufacturer's reasons.
*Posisi lampu sein harus diubah. *Cannot be installed on JC92 (model).
*This is the clear gel coat finish of the carbon, but recommending you to paint with 2-part urethane clear before installation to prevent discoloration (yellowing) in sunlight.
*The position of the blinker needs to be changed.
*There may be changes in product specifications due to the manufacturer's reasons.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/