- Beranda
- Motor
- YAMAHA 401 - 750cc
- YZF-R7
- Sparepart Motor
- Suspensi / Rearset / Velg / Swingarm
- Foot Control
- Rearset
- SNIPER
- SNIPER: Set Belakang
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
4Posisi Footpeg/Dimungkinkan untuk Pergeseran Mundur. fungsi
37.5mm Kembali/22.5mm Atas
37.5mm Kembali / 35mm Atas
50mm Kembali/22.5mm Atas
50mm Kembali/35mm Atas
4-step position / reverse shift possible
37.5mm Back / 22.5mm Up
37.5mm Back / 35mm Up
50mm Back / 22.5mm Up
50mm Back / 35mm Up
37.5mm Kembali/22.5mm Atas
37.5mm Kembali / 35mm Atas
50mm Kembali/22.5mm Atas
50mm Kembali/35mm Atas
4-step position / reverse shift possible
37.5mm Back / 22.5mm Up
37.5mm Back / 35mm Up
50mm Back / 22.5mm Up
50mm Back / 35mm Up
[Deskripsi]
Selang rem OEM dan sakelar rem tersedia.
Reverse Shift dapat diubah, dapat dipasang tanpa modifikasi.
Kuantitas: Pasangan (untuk Kiri dan Kanan) Ujung pedal dapat diubah dalam dua posisi.
Footpegnya menggunakan tipe high grip dengan cut-out groove..
Bantalan ganda dipasang pada bagian spindel ..
Stock brake hose and brake switch can be used.
Reverse shift change is possible, and can be installed without modification.
Left and right pedal tips can be changed in two positions.
The rearset bar is a high-grip type with machined grooves.
Spindle section with built-in double bearing.
Reverse Shift dapat diubah, dapat dipasang tanpa modifikasi.
Kuantitas: Pasangan (untuk Kiri dan Kanan) Ujung pedal dapat diubah dalam dua posisi.
Footpegnya menggunakan tipe high grip dengan cut-out groove..
Bantalan ganda dipasang pada bagian spindel ..
Stock brake hose and brake switch can be used.
Reverse shift change is possible, and can be installed without modification.
Left and right pedal tips can be changed in two positions.
The rearset bar is a high-grip type with machined grooves.
Spindle section with built-in double bearing.
Catatan
* Gambar hanya untuk referensi. Gambar yang ditampilkan mungkin berbeda dari produk yang sebenarnya.
Peringatan
* Harap diperhatikan bahwa spesifikasi produk dapat berubah karena alasan pabrikan.
* Ada beberapa kasus yang mengandung warna lain di foto.
* Harap pastikan untuk memiliki orang yang berkualifikasi seperti mekanik yang menginstalnya.
* Tidak diperlukan baut tambahan, tidak perlu modifikasi.
* Harap kencangkan baut saat dipasang sementara.
* Gunakan pengunci benang untuk mencegah baut mengendur. *There may be changes in product specifications due to the manufacturer's reasons.
*Images may contain other colors.
*Please be sure to ask a qualified and skilled person such as a mechanic to install the product.
*No additional bolts are required, no modification is required.
*Please tighten the bolts tightly as the delivery is in the state of temporary assembly.
*Use a thread locker agent to prevent the bolts from loosening.
[If the stock quick shifter is installed]
Part Number: Please prepare VPH160 / Shift rod 160mm separately.
By removing the left-hand thread pillow ball from the standard shift rod and installing the left-handed thread pillow ball on the 160mm shift rod, it can be connected to the stock quick shifter.
For models equipped with the stock quick shifter, operation is possible only with regular shifting.
Reverse shift is not supported.
* Ada beberapa kasus yang mengandung warna lain di foto.
* Harap pastikan untuk memiliki orang yang berkualifikasi seperti mekanik yang menginstalnya.
* Tidak diperlukan baut tambahan, tidak perlu modifikasi.
* Harap kencangkan baut saat dipasang sementara.
* Gunakan pengunci benang untuk mencegah baut mengendur. *There may be changes in product specifications due to the manufacturer's reasons.
*Images may contain other colors.
*Please be sure to ask a qualified and skilled person such as a mechanic to install the product.
*No additional bolts are required, no modification is required.
*Please tighten the bolts tightly as the delivery is in the state of temporary assembly.
*Use a thread locker agent to prevent the bolts from loosening.
[If the stock quick shifter is installed]
Part Number: Please prepare VPH160 / Shift rod 160mm separately.
By removing the left-hand thread pillow ball from the standard shift rod and installing the left-handed thread pillow ball on the 160mm shift rod, it can be connected to the stock quick shifter.
For models equipped with the stock quick shifter, operation is possible only with regular shifting.
Reverse shift is not supported.
Model yang Sesuai
Gunakan kupon
Review Gambar
Review detail
/