- Beranda
- Sparepart Motor
- Knalpot
- DB Killer
- Auto Magic
- Auto Magic: Peredam Knalpot
Cek kupon saya
Jumlah
100% Ori
Garansi 7 hr
Gratis Cashback
Nett Tanpa Biaya Tambahan
Model yang Sesuai
Lihat SemuaRincian Produk
Konten ini diterjemahkan oleh Google, jika Anda ingin melihat aslinya, silakan klik
Lihat versi asli
Spesifikasi:
Φ60
Tipe Dinding W
Ukuran : S Φ60
W wall type
Size: S
Tipe Dinding W
Ukuran : S Φ60
W wall type
Size: S
[Deskripsi]
Instruksi pemasangan penyekat bagian dalam
Tersedia sebagai tipe sambungan pegas.
Itu diperbaiki antara peredam dan pipa ekor ..
Juga, sumbat penyekat bagian dalam di ujung knalpot (satu bagian besar)
Dan itulah yang membuat mereka tidak masuk ..
Tiga jenis produk tersedia untuk φ60, φ54 dan φ50.
Ini adalah indikasi diameter luar pipa ekor.
Jarak bebasnya minus 3mm.
Jika untuk diameter 60mm, maka diameter bagian yang masuk adalah 57mm ..
Bagian stopper (Panjang 3mm) memiliki diameter luar 60mm ..
(φ54 / φ50 bagian sama untuk φ54 / φ50 dengan minus φ3mm di dalam)
* Pipa ekor adalah pipa yang menghubungkan antara perakitan dan peredam suara ..
* Sambungan antara tail pipe dan silencer belum tentu berbentuk lingkaran sempurna ..
* Diameter dalam bayonet peredam berbeda dari satu pabrik ke pabrik lainnya.
* Penutup penyekat pada sambungan tipe flensa (Plat & jenis memperbaiki baut) mungkin tidak tertangkap dan mungkin tidak mungkin untuk dipasang.
Dalam beberapa kasus, penghenti mungkin tidak dipasang ..
* Megafon KERKER bukanlah tipe tetap dengan sambungan berpita.
Dalam beberapa kasus, penyekat penyekat mungkin tidak dipasang ..
Inner baffle installation instructions
Available in spring joint type.
It is attached between the silencer and the tail pipe.
Also, the inner baffle stopper (larger part) on the tail pipe end
prevents it from falling in.
We have three types of products for Φ60, Φ54 and Φ50.
This is the outer diameter of the tail pipe
It has a clearance of -3mm
For Φ60, the part that goes inside has a thickness of Φ57.
The outer diameter of the stopper part (length 3mm) is Φ60.
(The part that goes inside for Φ54/Φ50 is also the same Φ3mm less)
*The tail pipe refers to the pipe between the merge collector and the silencer.
*The joint between the tail pipe and the silencer is not always a perfect circle.
*The inside diameter of the inlet on the silencer side varies from manufacturer to manufacturer.
*For flange type joint (plate & bolted),
in some cases, the baffle stopper cannot be inserted and so it cannot be installed.
*In cases where the joint is secured using a band, similar to KERKER megaphones,
there might be instances where the baffle stopper cannot be inserted and installation becomes impossible.
Catatan
Tipe W-wall untuk tail pipe tanpa tekukan sebelum titik kawin dengan peredam suara.
Instruksi instalasi.I
Gambar-gambar ini hanya untuk referensi ..
Instruksi instalasi.I
Gambar-gambar ini hanya untuk referensi ..
W wall type is for the tail pipe which does not have a bend just before the joining part with silencer.
Installation instructions are here.
The image is for reference only.
Installation instructions are here.
The image is for reference only.
PRODUK YANG JUGA DILIHAT
Produk Siap Dikirim dari Gudang Jepang
Rekomendasi buat Kamu
Best Seller
New Custom Article
Gunakan kupon
Review Gambar
Review detail
/