- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Lampu
- Lampu Depan
- Lampu Depan
- Gaya luar biasa.... (JvB Moto: [KEDO] LED Headlight & Cover Kit)
【JvB Moto】[KEDO] LED Headlight & Cover Kit Review
Style is outstanding.
It is one of the options for those who want to make their MT-07 a round-eyed Spec.
Note that there are different types of Covers for different years.
Exclusive Design (same as XSR700) so it can be installed with Refreshing.
However, you need to modify the body side when you install it.
Arm holding the Harness of the Right Side near the with Handle interferes with the Cover, so bend it.
It is not so difficult if you do it with Pliers, but be careful not to break it.
Harness handling needs to be moved a bit to fit somewhat.
And the color of the Harness on the Body side is different from the Harness on the Headlight side.
Harness is not waterproof, so you need to waterproof it accordingly.
Also, the only way to adjust the optical axis is to use the screw to fix the body.
If you loosen it too much, the Body will rattle, so you'll have to tighten it up by adding a Rubber Washer or collar.
Color:Unpainted, has some BALI and dents. You can't see it from a distance even if you put it on as it is.
I left it in the hands of a PRO painter and had it beautifully matted Black.
The Instruction Manual is entirely in German.
If you have the ability to handle the above to some extent, I think you can install it without any problems.
If the above is difficult or you don't understand it, ask Shop or other people to help you.
The style is outstanding, so please give it a try.
Gaya luar biasa.
Ini adalah salah satu opsi bagi mereka yang ingin menjadikan MT-07 mereka sebagai Spec mata bulat.
Perhatikan bahwa ada berbagai jenis Pertanggungan untuk tahun yang berbeda.
Desain Eksklusif (sama dengan XSR700) sehingga dapat diinstal dengan Refreshing.
Namun, Anda perlu memodifikasi sisi bodi saat memasangnya.
Lengan yang memegang Harness dari Sisi Kanan di dekat Handle akan mengganggu Cover, jadi tekuk.
Ini tidak terlalu sulit jika Anda melakukannya dengan Tang, tetapi berhati-hatilah agar tidak merusaknya.
Penanganan harness perlu dipindahkan sedikit agar pas.
Dan warna Harness di sisi Body berbeda dengan Harness di sisi Headlight.
Harness tidak tahan air, jadi Anda harus membuatnya tahan air.
Juga, satu-satunya cara untuk menyesuaikan sumbu optik adalah dengan menggunakan sekrup untuk memperbaiki bodi.
Jika Anda terlalu mengendurkannya, Body akan bergetar, jadi Anda harus mengencangkannya dengan menambahkan Rubber Washer atau collar.
Warna: Tidak dicat, ada sedikit BALI dan penyok. Anda tidak dapat melihatnya dari kejauhan bahkan jika Anda memakainya apa adanya.
Saya meninggalkannya di tangan seorang pelukis PRO dan membuatnya menjadi hitam indah.
Instruksi Manual sepenuhnya dalam bahasa Jerman.
Jika Anda memiliki kemampuan untuk menangani hal di atas sampai batas tertentu, saya pikir Anda dapat menginstalnya tanpa masalah.
Jika di atas sulit atau Anda tidak memahaminya, mintalah Toko atau orang lain untuk membantu Anda.
Gayanya luar biasa, jadi silakan mencobanya.