- Beranda
- Ulasan Produk
- Sparepart Motor
- Rem
- Master Cylinder Rem
- Itu perlu diproses.... (KN Planning: [Repair Parts] Master Cylinder)
【KN Planning】[Repair Parts] Master Cylinder Review
Sesuai: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125LIMITED, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125
It needed to be processed.
I bought this for a K5 Address for Replacement.
The diameter of the bolt for the brake lever is too small, so I had to use a drill to make the hole bigger.
In addition, when I blew out the air of the brake, the return side of the Master Cylinder was not equipped with a process to prevent the brake fluid from blowing out, so the brake fluid scattered a little.
The feeling of use after installation is that Brake is working normally without any particular problem.
Itu perlu diproses.
Saya membeli ini untuk Alamat K5 untuk Penggantian.
Diameter baut untuk tuas rem terlalu kecil, jadi saya harus menggunakan bor untuk membuat lubang lebih besar.
Selain itu, ketika saya meniup udara rem, sisi belakang Master Cylinder tidak dilengkapi dengan proses untuk mencegah minyak rem keluar, sehingga minyak rem sedikit berhamburan.
Perasaan penggunaan setelah pemasangan adalah Rem berfungsi normal tanpa masalah khusus.