- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Indikator / Alat Ukur
- Film Pelindung Speedometer
- Film dudukan sisi belakang tidak terkelupas…... (DRC: Meter Windshield Protective Film)
【DRC】Meter Windshield Protective Film Review
Sesuai: HONDA CT125, HONDA MONKEY125, HONDA TRAIL125
The back side mount Film is not peeled off…
The Film which became the base of Reverse side did not come off easily no matter how carefully and carefully I did. It is not peeled off at first by turning the Seal which is attached. After all, it wakes up with a nail and it becomes a thing to peel off, and the edge of BodyFilm is damaged inevitably.
Also, the CT125 Meter is a curved surface, so the degree of difficulty is quite high, and even if I discount my clumsiness, I couldn't paste it satisfactorily with the Film which damaged the edge. In the end, I threw away both of them because the glue was left when I removed them from the Meter, and I had to damage the Meter to remove it.
We recommend that you leave the work to a shop that knows how to do it, but even a PRO may not be able to remove the mount film well.
Film dudukan sisi belakang tidak terkelupas…
Film yang menjadi dasar dari sisi Reverse tidak mudah lepas tidak peduli seberapa hati-hati dan hati-hati saya melakukannya. Itu tidak terkelupas pada awalnya dengan memutar Seal yang terpasang. Bagaimanapun, itu bangun dengan paku dan menjadi sesuatu yang terkelupas, dan ujung BodyFilm pasti rusak.
Selain itu, CT125 Meter adalah permukaan yang melengkung, jadi tingkat kesulitannya cukup tinggi, dan bahkan jika saya mengabaikan kecanggungan saya, saya tidak dapat menempelkannya secara memuaskan dengan Film yang merusak tepinya. Pada akhirnya, saya membuang keduanya karena lem tertinggal ketika saya melepaskannya dari Meteran, dan saya harus merusak Meteran untuk melepaskannya.
Kami menyarankan Anda menyerahkan pekerjaan ke toko yang tahu cara melakukannya, tetapi bahkan seorang PRO mungkin tidak dapat melepas film dudukan dengan baik.