- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Indikator / Alat Ukur
- Film Pelindung Speedometer
- Setelah sekian lama:····... (DRC: Meter Windshield Protective Film)
【DRC】Meter Windshield Protective Film Review
Sesuai: HONDA 400X, HONDA CB400F, HONDA CB500F, HONDA CB500X, HONDA CBR400R, HONDA CRF250L, HONDA CRF250M, HONDA CRF250RALLY, HONDA GROM, HONDA CBR500R, HONDA CB500F, HONDA CB500X
After all this time:・・・・
What made you decide to buy?
It's a little late now, but for the protection of the GROMOEMMeter.
[About Enforcement]
I thought of removing the meter and working on it in the bathroom, but I didn't have the energy to do that, so I worked on it outside without removing the meter. I wanted to remove the Meter and work on it in the bathroom, but I didn't have the energy to do that, so I worked on it outside without removing it.
Before the work, I blew the dust around the meter with Air, cleaned the meter with WetSeat, and wiped it clean with Cleaning Cross. This method is easy to position and apply. This method is easy to position and has a low risk of failure, so it only took about 5 minutes to complete.
How was your experience with it?
The product description states that prolonged exposure to sunlight will accelerate the deterioration of the film. If there is no failure at the time of pasting, the film will last for 1Quantity.:Because there is a set, when it deteriorates, I think that it is OK if I stick the remaining film. After the work, let's keep it in Large cut.
Also, the Instruction Manual was written in an easy-to-understand manner, so please read it carefully before starting work.
After installation, it is easy to see the meter and you can't tell if there is a film on it.
Setelah sekian lama:····
Apa yang membuat Anda memutuskan untuk membeli?
Sudah agak terlambat sekarang, tetapi untuk perlindungan GROMOEMMeter.
[Tentang Penegakan]
Saya berpikir untuk melepas meteran dan mengerjakannya di kamar mandi, tapi saya tidak punya tenaga untuk melakukannya, jadi saya mengerjakannya di luar tanpa melepas meteran. Saya ingin melepas Pengukur dan mengerjakannya di kamar mandi, tetapi saya tidak punya tenaga untuk melakukannya, jadi saya mengerjakannya di luar tanpa melepasnya.
Sebelum bekerja, saya meniup debu di sekitar meteran dengan Air, membersihkan meteran dengan WetSeat, dan menyekanya dengan Cleaning Cross. Metode ini mudah untuk diposisikan dan diterapkan. Metode ini mudah diposisikan dan memiliki risiko kegagalan yang rendah, sehingga hanya membutuhkan waktu sekitar 5 menit untuk menyelesaikannya.
Bagaimana pengalaman Anda dengannya?
Deskripsi produk menyatakan bahwa paparan sinar matahari yang terlalu lama akan mempercepat kerusakan film. Jika tidak ada kegagalan pada saat menempel, film akan bertahan selama 1 Kuantitas.:Karena ada satu set, ketika memburuk, saya pikir tidak apa-apa jika saya menempelkan film yang tersisa. Setelah bekerja, mari kita simpan dalam potongan besar.
Juga, Instruksi Manual ditulis dengan cara yang mudah dipahami, jadi harap baca dengan seksama sebelum mulai bekerja.
Setelah pemasangan, mudah untuk melihat meteran dan Anda tidak dapat mengetahui apakah ada film di atasnya.