- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Indikator / Alat Ukur
- Film Pelindung Speedometer
- Sebuah produk yang dapat bekerja dalam jangka me... (DRC: Meter Windshield Protective Film)
【DRC】Meter Windshield Protective Film Review
Sesuai: HONDA CT125, HONDA MONKEY125, HONDA TRAIL125
A product that may work in the medium to long term.
The Meterassy of the CT125 CT110 HUNTER CUB has a convex spherical structure of resin, which is easier to scratch than you think!
So I Ordered this product!
As a matter of fact, it's only after it's scratched that I'm able to remove the scratches at the same time ω
I ordered a low cost headlight polish with Linley solvent, polished it twice, and repeated finishing with Micro fiber, and it recovered a reasonably clean feeling.
From there, as per the Manual, degreasing cleaning> temporary fasteningSeal using three temporary fastening, since there is no mist spray, Self sake splashω
I filled it with water, scraped out the air bubbles with the included spatula, and somehow
I'm glad I didn't make a mistake and fall into the trap of having to use a second one ω
The manual is very helpful, and the work is not so difficult if you follow the steps and do it properly.
I think it's Level for 15 minutes of labor.
The CT110 HUNTER CUB is a digital meter, so it's hard to understand intuitively, so it's important to keep the meter screen visible.
I think it's not a bad idea to use a protective film to prevent scratches before they happen.
Sebuah produk yang dapat bekerja dalam jangka menengah hingga panjang.
Meterassy dari CT125 CT110 HUNTER CUB memiliki struktur resin bulat cembung, yang lebih mudah tergores daripada yang Anda kira!
Jadi saya memesan produk ini!
Faktanya, hanya setelah tergores saya bisa menghilangkan goresan pada saat yang sama
Saya memesan pemoles lampu depan murah dengan pelarut Linley, memolesnya dua kali, dan finishing berulang dengan serat Mikro, dan itu memulihkan perasaan yang cukup bersih.
Dari sana, sesuai Manual, pembersihan degreasing> pengikatan sementaraSegel menggunakan tiga pengikat sementara, karena tidak ada semprotan kabut, Percikan sakeω
Saya mengisinya dengan air, mengeluarkan gelembung udara dengan spatula yang disertakan, dan entah bagaimana
Saya senang saya tidak membuat kesalahan dan jatuh ke dalam perangkap karena harus menggunakan yang kedua
Manual ini sangat membantu, dan pekerjaannya tidak begitu sulit jika Anda mengikuti langkah-langkahnya dan melakukannya dengan benar.
Saya pikir itu Level selama 15 menit kerja.
CT110 HUNTER CUB adalah pengukur digital, jadi sulit untuk dipahami secara intuitif, jadi penting untuk menjaga layar pengukur tetap terlihat.
Saya pikir itu bukan ide yang buruk untuk menggunakan film pelindung untuk mencegah goresan sebelum terjadi.