- Beranda
- Ulasan Produk
- Sparepart Motor
- Rangka
- Jalu Paddock
- Setelah menjalankan mobil, kami menemukan mengap... (KAWASAKI: Stand Hook Bolt)
【KAWASAKI】Stand Hook Bolt Review
Sesuai: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
After running the car, we found out why it was not included in the compatible models.
The Swing Arm has the Stand Hook mounting holes, but for some reason the Ninja 650 is not included in the Kawasaki OEM Stand Hook.
I bought the other sizes for vehicles that fit the mounting holes of the Swing Arm and tried to install them.
When the maintenance stand was used afterwards, there was not even a thing that was scratched on the body of the car.......but when I ran around the neighborhood a little after maintenance and touched the part to check the looseness of the Mounting Bolt, the exhaust hit or it was quite hot!
There was a good reason why it wasn't in the compliant models.
The resin part might melt if you run for a long time in Touring, etc., so I remove it except when using STAND. 。
Setelah menjalankan mobil, kami menemukan mengapa itu tidak termasuk dalam model yang kompatibel.
Lengan Ayun memiliki lubang pemasangan Kait Berdiri, tetapi karena alasan tertentu Ninja 650 tidak termasuk dalam Kait Berdiri OEM Kawasaki.
Saya membeli ukuran lain untuk kendaraan yang sesuai dengan lubang pemasangan Lengan Ayun dan mencoba memasangnya.
Ketika dudukan perawatan digunakan setelah itu, bahkan tidak ada satu pun yang tergores di bodi mobil ....... tetapi ketika saya berlari di sekitar lingkungan sedikit setelah perawatan dan menyentuh bagian itu untuk memeriksa kelonggarannya Baut Pemasangan, knalpot terkena atau cukup panas!
Ada alasan bagus mengapa itu tidak ada dalam model yang sesuai.
Bagian resinnya bisa meleleh kalau lama-lama di Touring dll, jadi saya copot kecuali pakai STAND. kan