Seat Replacement beginner friendly!

Reason for purchase
The normal seat has a hole in it and it absorbs water.
I bought it to deal with the Urethane inside as soon as possible because it was going to be torn apart.
I was hoping it would be sooner than later because the actual hole was 2017WAX old man.
Three years have passed.

Reupholstering work
First of all, I'll briefly explain how you will perceive it depending on your experience with reupholstery.
I'm new to reupholstering, I've reupholstered twice in Total.
1st time... WR250XNormal Seat Cover was peeled off once, and Normal Seat Cover was reattached again by shaving the Urethane of NORMAL in the low footpegSeat style (Manual Tucker).
2nd... KLX125SPIRAL High Seat Replacement... Because there was animation, this was referred to, but because Spec. of Seat cover had changed, because it made a slight mistake and redoed several times, the hole of Tucker has been vacant for a lot of failures. (Air Tucker)

The reupholstering process began as anxious as ever.
You will need to adjust the air pressure and the specs of the tucker bullets, etc. because we used the Air Tucker this time.
If the air pressure is high, it will punch out the seat cover, and if the legs of bullets are long, the legs of bullets may come out on the surface where the urethane of both sides of Seat is thin. We recommend you to check the spec. of Air Tucker when you purchase it because some of the Air Tucker's spec. cannot be used with the legs less than 10mm in length.
The bullets used in the OEM were 3-4mm, I believe.
When the adjustment is finished, temporarily fix the upper and lower Quantity:Pair (for Left and Right) Tucker to the front of the Seat.:Pair (for Left and Right) in turn stopped towards the back.
If the sagging occurred, I pulled it back again from where it had returned slightly and stopped it.
However, I punched out two parts of the seat cover due to the air pressure adjustment failure and the blank shot.
Quantity every time:Pair (for Left and Right) It was a Large oddity to pull on the even etc. and also to pull on the front and back without any slack.
The Seat coverBody is different from the previous models in that there is quite a bit of room between the place where you hit it with the Tucker and the place where you pull it with your fingers, and it was quite easy to pull it.

Effects
I haven't ridden it in bad weather, so I don't know how well it works in extreme conditions.
On normal courses and riverbeds, the Grip is frankly better than the Normal seat.
When I tightened Seat with my thighs on the climbs of the gully and the steep climbs at Standing, it was hard to move backwards.
I had to use my arms to hold on to my body as it was being taken backwards, but the rate of that was reduced and the Stamina in my arms lasted longer.

Current state
The current state is not slippery enough, but I wanted to add a grip on the shape of the seat cover in addition to the grip on the material.

Penggantian Kursi ramah pemula!

Alasan pembelian
Kursi normal memiliki lubang di dalamnya dan menyerap air.
Saya membelinya untuk menangani Urethane di dalamnya sesegera mungkin karena akan terkoyak.
Saya berharap itu akan lebih cepat daripada nanti karena lubang yang sebenarnya adalah orang tua 2017WAX.
Tiga tahun telah berlalu.

Pekerjaan pelapisan ulang
Pertama-tama, saya akan menjelaskan secara singkat bagaimana Anda akan melihatnya tergantung pada pengalaman Anda dengan pelapis ulang.
Saya baru dalam reupholstering, saya sudah reupholster dua kali di Total.
Pertama kali... WR250XNormal Seat Cover terkelupas satu kali, dan Normal Seat Cover dipasang kembali dengan mencukur Urethane NORMAL dalam gaya footpegSeat rendah (Manual Tucker).
2nd... KLX125SPIRAL High Seat Replacement... Karena ada animasi, ini dirujuk, tapi karena Spec. Penutup jok telah berubah, karena membuat sedikit kesalahan dan diulang beberapa kali, lubang Tucker telah kosong karena banyak kegagalan. (Tuker Udara)

Proses reupholstering mulai cemas seperti biasa.
Anda perlu menyesuaikan tekanan udara dan spesifikasi peluru tucker, dll. karena kami menggunakan Air Tucker kali ini.
Jika tekanan udara tinggi, itu akan melubangi penutup kursi, dan jika kaki peluru panjang, kaki peluru bisa keluar di permukaan di mana urethane dari kedua sisi Kursi tipis. Kami menyarankan Anda untuk memeriksa spesifikasi. Air Tucker saat Anda membelinya karena beberapa spesifikasi Air Tucker. tidak dapat digunakan dengan panjang kaki kurang dari 10mm.
Peluru yang digunakan dalam OEM adalah 3-4mm, saya percaya.
Saat penyetelan selesai, pasang sementara Tucker Kuantitas:Pasang (untuk Kiri dan Kanan) atas dan bawah ke depan Kursi.:Pasangkan (untuk Kiri dan Kanan) secara bergantian berhenti ke arah belakang.
Jika kendur terjadi, saya menariknya kembali dari tempat ia kembali sedikit dan menghentikannya.
Namun, saya melubangi dua bagian penutup kursi karena kegagalan penyetelan tekanan udara dan bidikan kosong.
Kuantitas setiap kali: Berpasangan (untuk Kiri dan Kanan) Itu adalah keanehan besar untuk menarik bahkan dll dan juga untuk menarik di depan dan belakang tanpa kendur.
CoverBody jok berbeda dari model sebelumnya karena ada sedikit ruang antara tempat Anda memukulnya dengan Tucker dan tempat Anda menariknya dengan jari, dan cukup mudah untuk menariknya.

Efek
Saya belum pernah mengendarainya dalam cuaca buruk, jadi saya tidak tahu seberapa baik kerjanya dalam kondisi ekstrim.
Pada jalur normal dan dasar sungai, Grip sejujurnya lebih baik daripada kursi Normal.
Ketika saya mengencangkan Kursi dengan paha saya di tanjakan selokan dan tanjakan curam di Berdiri, sulit untuk mundur.
Saya harus menggunakan tangan saya untuk menahan tubuh saya saat itu ditarik ke belakang, tetapi kecepatannya berkurang dan Stamina di tangan saya bertahan lebih lama.

Kondisi saat ini
Kondisi saat ini tidak cukup licin, tapi saya ingin menambahkan grip pada bentuk cover jok selain grip pada materialnya.