- Beranda
- Ulasan Produk
- Sparepart Motor
- Knalpot
- Gasket Knalpot
- Gasket Knalpot
- Keandalannya luar biasa... (KITACO: Exhaust System Gasket (1 Set Of 4pcs.))
【KITACO】Exhaust System Gasket (1 Set Of 4pcs.) Review
Sesuai: KAWASAKI VULCAN400, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1100II, KAWASAKI ZRX1100, KAWASAKI Z750 (water-cooled), KAWASAKI Z1000 (water-cooled), KAWASAKI W800, KAWASAKI W650, KAWASAKI W400, KAWASAKI KLE400, KAWASAKI GPz1100, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ1000RX,
Reliability is excellent
[Was there anything that disappointed you?
None
I'm a heavy user
Do you have any wishes or improvements you would like to make for the Manufacturer?
Large sturdy so far, but I hope they don't lose the older model configurations as well
[Do you have any products to compare it to?
KawasakiOEM
What made you decide to buy?
It's a product that you can't go wrong based on its past use
How was your experience with it?
No problem, of course
When in use, the engine and exhaust system are both crushed by Beauty, and the engine and exhaust system sides are both firmly They stick together
Was the installation difficult?
If you are trying to do the Exhaust System desorption and removal, I don't think it's a problem
【Please tell me the installation point and hang】
It's no different from the OEM, but I'm not sure if there are any foreign objects trapped in it, or if the gasket in use has been removed, or if it's been removed Make sure that the exhaust flange is firmly seated in the specified position, and then check that the exhaust flange is installed evenly It's just to make sure it's tight Note that it's soft and can be tightened as much as you want
The W800 has no obstructions around the exhaust system, so the work is relatively easy to do
[Was the Instruction Manual easy to understand?
No Instruction Manual is required
[Included Parts:were they on?
None
[Others]
Inexpensive ones, but you will need them when you remove the exhaust system, so be sure to get 1 set for 1 VehicleStock is available
By the way, the Service Manual states that this is a replacement part
Keandalannya luar biasa
[Apakah ada yang membuatmu kecewa?
Tidak ada
Saya pengguna berat
Apakah Anda memiliki keinginan atau perbaikan yang ingin Anda buat untuk Pabrikan?
Besar kokoh sejauh ini, tapi saya harap mereka tidak kehilangan konfigurasi model lama juga
[Apakah Anda memiliki produk untuk membandingkannya?
KawasakiOEM
Apa yang membuat Anda memutuskan untuk membeli?
Ini adalah produk yang Anda tidak bisa salah berdasarkan penggunaan sebelumnya
Bagaimana pengalaman Anda dengannya?
Tidak masalah, tentu saja
Saat digunakan, mesin dan sistem pembuangan keduanya dihancurkan oleh Kecantikan, dan sisi mesin dan sistem pembuangan keduanya dengan kuat Mereka saling menempel
Apakah pemasangannya sulit?
Jika Anda mencoba melakukan desorpsi dan penghapusan Sistem Pembuangan, saya rasa itu tidak masalah
Tolong beri tahu saya titik pemasangan dan gantung】
Tidak ada bedanya dengan OEM, tetapi saya tidak yakin apakah ada benda asing yang terperangkap di dalamnya, atau jika gasket yang digunakan telah dilepas, atau jika sudah dilepas. Pastikan flensa buang terpasang dengan kuat di tempat yang ditentukan. posisi, lalu periksa apakah flensa knalpot terpasang rata Hanya untuk memastikan kencang Perhatikan bahwa itu lembut dan dapat dikencangkan sebanyak yang Anda inginkan
W800 tidak memiliki penghalang di sekitar sistem pembuangan, sehingga pekerjaan relatif mudah dilakukan
[Apakah Instruksi Manual mudah dimengerti?
Tidak ada Instruksi Manual diperlukan
[Bagian yang Termasuk: apakah mereka aktif?
Tidak ada
[Yang lain]
Yang murah, tetapi Anda akan membutuhkannya saat Anda melepas sistem pembuangan, jadi pastikan untuk mendapatkan 1 set untuk 1 VehicleStock tersedia
Omong-omong, Manual Servis menyatakan bahwa ini adalah suku cadang pengganti