- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Mesin
- Tutup Busi
- Sparepart Pengapian
- Tutup Busi
- Mari kita pilih tentang penanganan.... (NGK: Plug Cap)
【NGK】Plug Cap Review
Let's choose about handling.
Basically, if there is Size of Plug, there is no particular problem, but when I made the upper bank L-Type, the handling of the code became cramped. Ignition wire can be broken even if it is too long, and if it is short it will become uneasy.
Initially I installed up and down L-Type, but as the handling of the upper bank got a bit stricter, I purchased additional T type. In the first place, let's say what type of L-Type of this Rubber Type is type I or I feel like L-Type when I call the code with the cord plug at the upper end SIDE of the extension of Plug. So T type is safe except in special handling cases. Even if it is T type it is very L letter. In the case of the resin type, I was shaping Alpha bet itself, but it was a lack of research.
Because OEM was T type when expressed with this product, we decided to L type at the bottom and T type at the top.
Easy to install here as well. The code side can connect reliably just by inserting Screw.
Mari kita pilih tentang penanganan.
Pada dasarnya kalau ada Size of Plug, tidak ada masalah khusus, tapi ketika saya membuat bank atas L-Type, penanganan kode menjadi sempit. Kawat pengapian bisa putus meskipun terlalu panjang, dan jika pendek akan menjadi tidak nyaman.
Awalnya saya memasang L-Type naik turun, tetapi karena penanganan tepi atas menjadi sedikit lebih ketat, saya membeli tipe T tambahan. Pertama-tama, katakanlah tipe L-Type dari Rubber Type ini adalah tipe I atau saya merasa seperti Tipe-L ketika saya memanggil kode dengan steker kabel di ujung atas SIDE perpanjangan Plug. Jadi tipe T aman kecuali dalam kasus penanganan khusus. Bahkan jika itu adalah tipe T, itu adalah huruf yang sangat L. Dalam kasus jenis resin, saya membentuk taruhan Alpha itu sendiri, tetapi itu adalah kurangnya penelitian.
Karena OEM adalah tipe T ketika diekspresikan dengan produk ini, kami memutuskan untuk tipe L di bagian bawah dan tipe T di bagian atas.
Mudah dipasang di sini juga. Sisi kode dapat terhubung dengan andal hanya dengan memasukkan Sekrup.