- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Lampu
- Bohlam Lampu Belakang
- Bohlam Lampu Belakang
- LEDisasi mudah! Oakon murah murah tidak!... (SP Takegawa: LED Tail Bulb Wedge T20 for OEM Tail Lamp)
【SP Takegawa】LED Tail Bulb Wedge T20 for OEM Tail Lamp Review
Sesuai: HONDA SUPER CUB 50, HONDA GYRO CANOPY, HONDA Universal, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA LITTLE CUB, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50
Easy LEDization! Cheap cheap Oakon no!
I purchased GYRO CANOPY because I wanted to make it LED.
Actually, I tried cheap overseas which I got from Oakon before using this, but it was completely bad with a break or flashing.
This product can be converted to LED just by replacing the NORMAL bulb.
It is the brightness of the bottom, but since it does not become bright like Halogen bulb, it is 4 stars (Is the comparison compared with bad?).
However, clearly clear light can be obtained than the NORMAL bulb!
Then, the LED has electrodes (Plus - Minus orientation) has been decided, so if you do not light up, please reverse the direction of insertion.
Also, please be careful not to touch the LED with bare hands or too much force when installing.
It becomes the source of Trouble.
LEDisasi mudah! Oakon murah murah tidak!
Saya membeli GYRO CANOPY karena saya ingin membuatnya menjadi LED.
Sebenarnya, saya mencoba murah di luar negeri yang saya dapatkan dari Oakon sebelum menggunakan ini, tapi itu benar-benar buruk dengan istirahat atau flashing.
Produk ini dapat diubah menjadi LED hanya dengan mengganti bohlam NORMAL.
Ini adalah kecerahan bagian bawah, tetapi karena tidak menjadi terang seperti bohlam Halogen, itu adalah 4 bintang (Apakah perbandingannya dibandingkan dengan yang buruk?).
Namun, cahaya yang jelas jernih dapat diperoleh dari bohlam NORMAL!
Kemudian, LED memiliki elektroda (orientasi Plus - Minus) telah ditentukan, jadi jika Anda tidak menyala, harap balikkan arah penyisipan.
Juga, harap berhati-hati untuk tidak menyentuh LED dengan tangan kosong atau terlalu kuat saat memasang.
Itu menjadi sumber Masalah.