- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Lampu
- Lampu Sein
- Tipe Flasher LED MOTOLED-602 Penutup mata ini me... (DRC: MOTOLED LED Flasher Type #602)
【DRC】MOTOLED LED Flasher Type #602 Review
MOTOLED LED Flasher Type-602These blinkers emit a stronger orange than the square LED blinkers that I had before.The DRC square blinkers do not bend so will break easily when you make a fall. They can break just by touching them in the incorre
MOTOLED LED Flasher Type-602
These blinkers emit a stronger orange than the square LED blinkers that I had before.
The DRC square blinkers do not bend so will break easily when you make a fall.
They can break just by touching them in the incorrect position when you're pushing the vehicle after it's stuck.
I mounted these blinkers on the front side and they didn't break after several falls, so I additionally purchased them for the rear side as well.
It's a little expensive but is much awesome and cheaper than the heavy and shabby expensive blinkers.
Just be careful that you'll need to replace the relay or they won't light up bright enough.
Once I had a OEM relay and purchased register wires from the same company. But the they didn't work properly despite the fact I purchased one each for all blinkers.
NOTE: I advise you to purchase relays from the same manufacturer because they will save energy and light up properely when relays are replaced.
By replacing relays, you'll be able to use the hazard lamp as well.
NOTE: But you won't be able to light it up continuously.
When replacing relay, tripple core couplers will be required. If you are confident, give it a try.
By the way, OEM blinkers cost 7000yen for one side so if you favor tough rides, I advise you to purchase these 2pc. Set LED blinkers.
If you have a OEM blinker but have replaced your fender with a DRC product or any other product, the fender will break due to the weight of the OEM blinker when you take tough enduro trips. For that sake, I recommend you mount the blinkers together with a fender eliminator kit.
If you are using a bullet terminal for wiring. terminal, installing process will be required on the vehicle side and blinker side.
I didn't want to touch the wiring on the vehicle side so I purchased together DAYTONA's HONDA New Blinker Parts No. 69862. Together with this product, I installed a male coupler on the blinker side to ease installation.
By the way, my vehicle is a CRF250L..
Tipe Flasher LED MOTOLED-602 Penutup mata ini memancarkan warna oranye yang lebih kuat daripada penutup mata LED persegi yang saya miliki sebelumnya. Penutup mata DRC persegi tidak bengkok sehingga mudah pecah saat terjatuh. Mereka bisa pecah
Tipe Flasher LED MOTOLED-602
Penutup mata ini memancarkan warna oranye yang lebih kuat daripada penutup mata LED persegi yang saya miliki sebelumnya.
Penutup mata DRC square tidak bengkok sehingga mudah pecah saat terjatuh.
Mereka dapat pecah hanya dengan menyentuhnya di posisi yang salah saat Anda mendorong kendaraan setelah macet.
Saya memasang penutup mata ini di sisi depan dan tidak pecah setelah beberapa kali jatuh, jadi saya juga membelinya untuk sisi belakang.
Ini sedikit mahal tapi jauh lebih mengagumkan dan lebih murah daripada penutup mata mahal yang berat dan lusuh.
Berhati-hatilah karena Anda harus mengganti relai atau relai tidak akan menyala cukup terang.
Suatu kali saya memiliki relai OEM dan membeli kabel register dari perusahaan yang sama. Tetapi mereka tidak berfungsi dengan baik meskipun saya membeli masing-masing untuk semua penutup mata.
CATATAN: Saya menyarankan Anda untuk membeli relai dari pabrikan yang sama karena akan menghemat energi dan menyala dengan baik saat relai diganti.
Dengan mengganti relai, Anda juga dapat menggunakan lampu hazard.
CATATAN: Tapi Anda tidak akan bisa menyalakannya terus menerus.
Saat mengganti relai, skrup tiga inti akan diperlukan. Jika Anda yakin, cobalah.
Omong-omong, penutup mata OEM berharga 7000 yen untuk satu sisi jadi jika Anda menyukai perjalanan yang sulit, saya menyarankan Anda untuk membeli 2 buah ini. Setel penutup mata LED.
Jika Anda memiliki blinker OEM tetapi telah mengganti spatbor Anda dengan produk DRC atau produk lainnya, spatbor akan pecah karena beratnya blinker OEM saat Anda melakukan perjalanan enduro yang berat. Untuk itu, saya sarankan Anda memasang penutup mata bersama dengan kit eliminator fender.
Jika Anda menggunakan terminal peluru untuk kabel. terminal, proses pemasangan akan diperlukan di sisi kendaraan dan sisi tanda bahayanya.
Saya tidak ingin menyentuh kabel di sisi kendaraan jadi saya membeli bersama DAYTONA's HONDA New Blinker Parts No. 69862. Bersama dengan produk ini, saya memasang male coupler di sisi blinker untuk memudahkan pemasangan.
Omong-omong, kendaraan saya adalah CRF250L..