- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Bracket Box
- Bergaya dan memuaskan... (DAYTONA: Multi Wing Carrier)
【DAYTONA】Multi Wing Carrier Review
Sesuai: HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR SP, HONDA CB1300SB, HONDA CB1300SUPER BOLDOR, HONDA CB1300SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300 SF, HONDA CB1300 SF
Stylish and satisfying
23' Installed on CB1300SB SP.
The quality of the single item is good, and the paint and anodizing are beautifully applied. The installation was easy due to the small number of parts.
Even after assembly, the rigidity is solid and satisfactory without feeling extravagant due to the small number of parts.
However, nominal load capacity is low (6kg) This makes me a little uneasy. The shape of the Grab Bar is also cantilevered from the attachment point, so some concern remains. However, the Grab Bar itself is also used to support the weight of the car, so I think the strength of the attachment point is sufficient.
The installation was completed without any problems because the center of the Plate and Bracket is determined by the plate bolt, so the mounting holes on the Grab Bar side and Plate side of the Bracket were used to temporarily secure the entire unit and then tighten it while observing the fit.
Overall, we are satisfied with the rigidity and appearance of the product, but it is regrettable that scratches are noticeable on the Bolt/Nut.
Bergaya dan memuaskan
23' Dipasang pada CB1300SB SP.
Kualitas satu item bagus, dan cat serta anodisasi diaplikasikan dengan indah. Pemasangannya mudah karena jumlah suku cadang yang sedikit.
Bahkan setelah perakitan, kekokohannya kokoh dan memuaskan tanpa terasa boros karena jumlah komponen yang sedikit.
Namun, kapasitas beban nominal rendah (6kg) Hal ini membuat saya sedikit gelisah. Bentuk Grab Bar juga kantilever dari titik attachment, jadi tetap ada kekhawatiran. Tapi, Grab Barnya sendiri juga digunakan untuk menopang bobot mobil, jadi menurut saya kekuatan attachment point-nya sudah cukup.
Pemasangan selesai tanpa masalah karena bagian tengah Plat dan Braket ditentukan oleh baut pelat, sehingga lubang pemasangan di sisi Grab Bar dan sisi Plat Braket digunakan untuk mengamankan sementara seluruh unit dan kemudian mengencangkannya sambil mengamati kesesuaian.
Secara keseluruhan, kami puas dengan kekokohan dan tampilan produk, namun sayangnya terdapat goresan pada Baut/Mur.