- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Mesin
- Mesin
- Noken As
- Akselerasi jalan raya dan start-up akan menyenan... (SP Takegawa: Sports Camshaft)
【SP Takegawa】Sports Camshaft Review
Sesuai: YAMAHA YFM250R RAPTOR250, YAMAHA SEROW250, YAMAHA SEROW250, YAMAHA XT250X, YAMAHA XG250 TRICKER
Highway and start-up acceleration will be pleasant.
[How is it used?
Touring on paved forest roads and city driving is Main.
Was the installation difficult?
The valve clearance was adjusted using the value provided with the Camshaft, and the value of the OEM Camshaft in the Service Manual is different from the value of the Exhaust System.
How was your experience with it?
I installed it on DG17J, which is not in the fitment, but I have not felt any problem.
(I contacted the manufacturer to be sure, but they said they could not guarantee the quality of the product because they had not verified it.)
I have the impression that the upper end of the range is well extended while the lower end of the range is the same as the NORMAL range.
[Included Parts:were they on?
Included Parts:Since there were no special parts, we prepared OEM products for the O-rings separately, but the original ones were not so deteriorated after all, so we used them as they were. The original O-rings were not so deteriorated, so we used them as they were.
[Was there anything that disappointed you?
One negative point is that the valve clearance, whether narrowed or widened (within the default value), seems to have become slightly larger, especially at low RPM. Currently, I am using 0.07mm, a little narrower than the standard value of 0.08mm in Manual.
I compromised with the fact that the Tappet sound may be a little too loud at high camshafts, so I thought it was inevitable.
Overall …
The highway and the start up of the Corner seemed to be somewhat more relaxed. Good thing you put it on…" It seems to me that this is a good idea.
It would be great if it were a little cheaper…
Akselerasi jalan raya dan start-up akan menyenangkan.
[Bagaimana cara menggunakannya?
Tur di jalan hutan beraspal dan berkendara di kota adalah Utama.
Apakah pemasangannya sulit?
Kelonggaran katup disesuaikan menggunakan nilai yang diberikan oleh Camshaft, dan nilai OEM Camshaft di Manual Servis berbeda dengan nilai Sistem Pembuangan.
Bagaimana pengalaman Anda dengannya?
Saya menginstalnya di DG17J, yang tidak sesuai, tapi saya tidak merasa ada masalah.
(Saya menghubungi pabrikan untuk memastikan, tetapi mereka mengatakan tidak dapat menjamin kualitas produk karena belum memverifikasinya.)
Saya mendapat kesan bahwa ujung atas kisaran diperpanjang dengan baik sedangkan ujung bawah kisaran sama dengan kisaran NORMAL.
[Termasuk Bagian: apakah mereka aktif?
Bagian yang Disertakan: Karena tidak ada bagian khusus, kami menyiapkan produk OEM untuk cincin-O secara terpisah, tetapi yang asli tidak terlalu rusak, jadi kami menggunakannya apa adanya. O-ring asli tidak terlalu rusak, jadi kami menggunakannya sebagaimana adanya.
[Apakah ada sesuatu yang membuatmu kecewa?
Satu poin negatifnya adalah celah katup, apakah menyempit atau melebar (dalam nilai default), tampaknya menjadi sedikit lebih besar, terutama pada RPM rendah. Saat ini, saya menggunakan 0,07mm, sedikit lebih sempit dari nilai standar 0,08mm di Manual.
Saya berkompromi dengan fakta bahwa suara Tappet mungkin agak terlalu keras pada camshaft tinggi, jadi saya pikir itu tidak bisa dihindari.
Keseluruhan …
Jalan raya dan mulainya tikungan tampak agak lebih santai. Untung Anda memakainya…" Menurut saya ini ide yang bagus.
Akan lebih bagus jika harganya sedikit lebih murah…