- Beranda
- Ulasan Produk
- Aksesoris
- Off-Road Stand
- Standar Paddock
- Lainnya
- Peralatan
- Standar Paddock
- Off-Road Stand
- Sangat nyaman untuk memilikinya untuk pemelihara... (DRC: HC2 Lift Stand)
【DRC】HC2 Lift Stand Review
It is very convenient to have it for maintenance.
[How is it used?
Purchased several years ago for storage and maintenance of Dual PurPass vehicles.
This time, we have used another company's Lift Stand that looks just like it." I am posting this because I would like to review the Lift Stand made by DRC again, as I have purchased a new one.
As of 2023, the regular price is 16,500 yen due to price hikes, but a few years ago when I bought it, it was available for less than 10,000 yen gold, including the discount from Webike.
Was the one you received as per Image?
I wanted to buy it when I saw the original at a Motorcycle supply store at the time, and I waited until the discount at Webike was more than enough to buy it.
Was the installation difficult?
Like the similar product I purchased the other day, it was packed in a box with the body part that lifts and the lever part that lifts by the principle of leverage detached, and after opening the box, it is assembled with two shafts and a CClip for fixing to look like the product introduction page by Webike.
The assembly is completed smoothly with no hole gaps, etc., without any problems.
Grease up is firmly applied to each shaft and moving parts when assembling.
How was your experience with it?
When we first started using it, there was no rattling and the vehicle was almost vertical and stable after lifting up, but after several years of frequent lifting and lowering, rattling began to appear on the inside and outside of the posts, causing the vehicle to lean slightly when lifting up (not enough to cause a risk of tipping over).
We have not taken special care of the Damper, but even after several years, we have not experienced any Damper gas loss, and the vehicle can be raised and lowered smoothly, so we believe the durability of the Damper is sufficient.
Unlike similar products, the paint is solid and to date, no paint peeling or rust has occurred.
[Was there anything that disappointed you?
There has been no disappointment to date, and the slight rattling noted above is nothing to worry about considering its age.
Other items that would be helpful
Point and hang of installation
As mentioned above, if each moving part is thoroughly greased up before use, wear and force on moving parts can be reduced, so it is a good practice.
Even if the STAND itself holds the vehicle firmly, if the ground is not soft or stable, the Motorcycle will easily fall over.
[Availability and clarity of the Instruction Manual
An instruction manual with illustrations of how to assemble and use the product is included, which is easy to understand for those who purchased this product for its functionality.
[Notes]
When lifting up, use the carBoth Sides of the car where the ground surface is as flat as possible.
Lifting up on an uneven surface can cause the vehicle to become unstable and fall over, damaging or injuring the motorcycle.
Also, be sure to lock the lock lever after lifting up.
Please make sure to check the lock to avoid the risk of accidentally touching the lever of the leverage part and causing the motorcycle to come down.
[ITEMS TO BUY TOGETHER
If you do not have Grease as a maintenance tool, purchase cheap Grease and apply it to the moving parts during assembly.
[Opinions and requests to Manufacturer
I would like to see more ColoringVariation in the Lever section, which is the leverage part, so that I can have different enjoyment when using multiple units. I would like to have more coloring variations of Blue, Lime green, and Color.:Would you like to have a Yellow?
Sangat nyaman untuk memilikinya untuk pemeliharaan.
[Bagaimana cara menggunakannya?
Dibeli beberapa tahun lalu untuk penyimpanan dan pemeliharaan kendaraan Dual PurPass.
Kali ini, kami telah menggunakan Lift Stand dari perusahaan lain yang terlihat persis seperti itu." Saya memposting ini karena saya ingin meninjau kembali Lift Stand yang dibuat oleh DRC, karena saya telah membeli yang baru.
Pada tahun 2023, harga regulernya adalah 16.500 yen karena kenaikan harga, tetapi beberapa tahun yang lalu ketika saya membelinya, tersedia emas kurang dari 10.000 yen, termasuk diskon dari Webike.
Apakah yang Anda terima sesuai Gambar?
Saya ingin membelinya ketika melihat aslinya di toko perlengkapan motor saat itu, dan saya menunggu sampai diskon di Webike lebih dari cukup untuk membelinya.
Apakah pemasangannya sulit?
Seperti produk serupa yang saya beli tempo hari, dikemas dalam kotak dengan bagian bodi yang mengangkat dan bagian tuas yang mengangkat dengan prinsip pengungkit terlepas, dan setelah membuka kotak, dirakit dengan dua poros dan CClip untuk perbaikan agar terlihat seperti halaman pengenalan produk oleh Webike.
Perakitan selesai dengan lancar tanpa celah lubang, dll, tanpa masalah.
Grease up diterapkan dengan kuat ke setiap poros dan bagian yang bergerak saat perakitan.
Bagaimana pengalaman Anda dengannya?
Saat pertama kali kami mulai menggunakannya, tidak ada derak dan kendaraan hampir vertikal dan stabil setelah diangkat, tetapi setelah beberapa tahun sering mengangkat dan menurunkan, derik mulai muncul di bagian dalam dan luar tiang, menyebabkan kendaraan bersandar sedikit saat mengangkat (tidak cukup untuk menyebabkan risiko terbalik).
Kami tidak merawat Damper secara khusus, tetapi bahkan setelah beberapa tahun, kami tidak mengalami kehilangan gas Damper, dan kendaraan dapat dinaikkan dan diturunkan dengan mulus, jadi kami yakin daya tahan Damper cukup.
Tidak seperti produk sejenis, catnya kokoh dan sampai saat ini tidak ada cat yang mengelupas atau berkarat.
[Apakah ada sesuatu yang membuatmu kecewa?
Tidak ada kekecewaan hingga saat ini, dan sedikit gemerincing yang disebutkan di atas tidak perlu dikhawatirkan mengingat usianya.
Barang-barang lain yang akan sangat membantu
Arahkan dan gantung instalasi
Seperti disebutkan di atas, jika setiap bagian yang bergerak dilumasi secara menyeluruh sebelum digunakan, keausan dan gaya pada bagian yang bergerak dapat dikurangi, jadi ini merupakan praktik yang baik.
Sekalipun STAND sendiri menahan kendaraan dengan kuat, jika tanahnya tidak empuk atau stabil, Sepeda Motor akan mudah terjatuh.
[Ketersediaan dan kejelasan Instruksi Manual
Panduan instruksi dengan ilustrasi cara merakit dan menggunakan produk disertakan, yang mudah dipahami bagi mereka yang membeli produk ini karena fungsinya.
[Catatan]
Saat mengangkat, gunakan mobilKedua sisi mobil yang permukaan tanahnya sedatar mungkin.
Mengangkat di permukaan yang tidak rata dapat menyebabkan kendaraan menjadi tidak stabil dan terjatuh, merusak atau mencederai sepeda motor.
Juga, pastikan untuk mengunci tuas pengunci setelah diangkat.
Harap pastikan untuk memeriksa kunci untuk menghindari risiko menyentuh tuas bagian pengungkit secara tidak sengaja dan menyebabkan sepeda motor turun.
[BARANG UNTUK DIBELI BERSAMA
Jika Anda tidak memiliki Gemuk sebagai alat perawatan, belilah Gemuk yang murah dan oleskan ke bagian yang bergerak selama perakitan.
[Pendapat dan permintaan ke Produsen
Saya ingin melihat lebih banyak ColoringVariation di bagian Lever, yang merupakan bagian pengungkit, sehingga saya bisa mendapatkan kesenangan yang berbeda saat menggunakan banyak unit. Saya ingin memiliki lebih banyak variasi pewarnaan Biru, Hijau limau, dan Warna.:Apakah Anda ingin memiliki Kuning?