- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Stang & Kemudi
- Tutup Lubang Spion
- Tutup Penutup yang Dapat Dilepas... (POSH: Mirror Hole Cover Cap)
【POSH】Mirror Hole Cover Cap Review
Detachable Cover Cap
I bought this to plug the mounting screw holes for the Back Mirror on my KLX125.
I often go to forest roads with KLX, not only open forest roads, but also many attack type forest roads, and sometimes I hit trees with Normal Back Mirror. Therefore, the Trial Mirror was installed under the handlebar. The mounting hole for the OEMB Back Mirror was left open. Well, it is OK to ignore it, but it is not so nice, so I covered the hole.
Functionally, a cheap and lightweight Plastic hole plug is sufficient. However, the Type, which is stuffed into a screw hole, is difficult to put on and take off. (It is easy to put it on by just pushing it in, but a little troublesome to take it off.) For on-road touring, the OEM Mirror is easier to use, so we will return to the OEM type. In such cases, the screw type is more convenient.
The disadvantage is that it is an aluminum cut-out, so it is naturally costly and expensive. You will pay about 1pc.500 yen just to plug the hole. (Plastic hole plugs are lightweight and much cheaper.)
I would recommend it to those who are concerned about the screw holes that removed OEMMirror and who are concerned about looking good or who repeatedly install and remove the OEMMirror.
Inexpensive, lightweight Material if you just want to plug the holes:Plastic is good.
Tutup Penutup yang Dapat Dilepas
Saya membeli ini untuk menyambungkan lubang sekrup pemasangan untuk Kaca Belakang di KLX125 saya.
Saya sering pergi ke jalan hutan dengan KLX, tidak hanya jalan hutan terbuka, tetapi juga banyak jalan hutan tipe serangan, dan terkadang saya menabrak pohon dengan Normal Back Mirror. Karena itu, Trial Mirror dipasang di bawah stang. Lubang pemasangan OEMB Back Mirror dibiarkan terbuka. Yah, tidak apa-apa untuk mengabaikannya, tapi tidak terlalu bagus, jadi saya menutup lubangnya.
Secara fungsional, steker lubang plastik yang murah dan ringan sudah cukup. Namun, Tipe yang dimasukkan ke dalam lubang sekrup sulit untuk dipasang dan dilepas. (Mudah untuk memasangnya hanya dengan mendorongnya, tapi agak merepotkan untuk melepasnya.) Untuk on-road touring, OEM Mirror lebih mudah digunakan, jadi kami akan kembali ke tipe OEM. Dalam kasus seperti itu, jenis sekrup lebih nyaman.
Kerugiannya adalah potongan aluminium, jadi tentu saja mahal dan mahal. Anda akan membayar sekitar 1pc.500 yen hanya untuk menutup lubang. (Sumbat lubang plastik ringan dan jauh lebih murah.)
Saya akan merekomendasikannya kepada mereka yang khawatir tentang lubang sekrup yang melepas OEMMirror dan yang khawatir tentang penampilan yang bagus atau yang berulang kali memasang dan melepas OEMMirror.
Bahan murah dan ringan jika Anda hanya ingin menutup lubang: Plastik itu bagus.