- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Stang & Kemudi
- Tutup Lubang Spion
- Bukan lubang cermin, tapi...... (DAYTONA: Mirror Hole Filling Bolt)
【DAYTONA】Mirror Hole Filling Bolt Review
Sesuai: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Not a Mirror hole, but...
The Z900RS has a base on the Frame for use with the Option Center Stand.
If the Center Stand is not attached, the Screw holes are visible and we would like to fill them for protection.
The hole size is M10×1.25, so you can use a hole-filling bolt for Mirror.
Lightweight Material:The trapezoidal bolt is made of aluminum and has a simple design, but is cool.
The Right Side simply attaches to the Screw hole.
The Left Side does not have Screw holes, but this time ButylTape was used.
Wrap the ButylTape around the bottom of the bolt and the neck in an O-ring shape and push it firmly into place.
In fact, the YOSHIMURA frame plug we are using now was originally installed with an O-ring, but it didn't feel quite right, so we removed the O-ring and pushed it in with a ButylTape. It is very firmly attached.
ButylTape is originally designed for waterproofing of lamps and mating surfaces, but it can be used for a variety of purposes if you have one pc.
Bukan lubang cermin, tapi...
Z900RS memiliki dasar pada Frame untuk digunakan dengan Option Center Stand.
Jika Dudukan Tengah tidak dipasang, lubang Sekrup akan terlihat dan kami ingin mengisinya untuk perlindungan.
Ukuran lubangnya M10×1.25, jadi bisa pakai baut pengisi lubang untuk Mirror.
Bahan Ringan: Baut trapesium terbuat dari aluminium dan memiliki desain yang sederhana, namun keren.
Sisi Kanan cukup menempel ke lubang Sekrup.
Sisi Kiri tidak memiliki lubang Sekrup, tapi kali ini ButylTape digunakan.
Bungkus ButylTape di sekitar bagian bawah baut dan leher dalam bentuk cincin-O dan dorong dengan kuat ke tempatnya.
Faktanya, steker bingkai YOSHIMURA yang kami gunakan sekarang awalnya dipasang dengan cincin-O, tetapi rasanya kurang pas, jadi kami melepas cincin-O dan mendorongnya dengan ButylTape. Itu melekat sangat kuat.
ButylTape awalnya dirancang untuk anti air pada lampu dan permukaan kawin, tetapi dapat digunakan untuk berbagai keperluan jika Anda memiliki satu pc.