- Beranda
- Ulasan Produk
- Perkakas
- Double Tape
- Double Tape
- Itu cukup kuat.... (amon: Ultra High-Strength Double-Coated Adhesive Tape (for Bike Interior))
【amon】Ultra High-Strength Double-Coated Adhesive Tape (for Bike Interior) Review
It's strong enough.
In order to use the Portable navigator mounted around the Handlebar and the DriveRecorder (DAYTONA DDR-S100) mounted on the Rear as a Mobile Battery drive, it became necessary to install a Mobile Battery around the Handlebar. The need arose to install a mobile battery around the handlebar.
I wanted to be able to easily attach and detach the Mobile Battery, so I attached the mount of REC mount+ to the Handlebar Brace and attached the Attachment to the Mobile BatteryBody to be able to use it. I wanted to use an existing Attachment, so I decided to use a Smartphone Holder that I had left over.
I had a double-sided tape of 10mm width, so I could use them side by side. I had 10mm wide double-sided tape, so I could use them side by side, but I thought a single piece would be more secure, so I bought this Seat type.
Since it is for in-car use, it may not be good in the rain, but I don't ride in the rain, and since the Mobile Battery is not waterproof to begin with, and I intend to remove it as soon as it rains, I consider rain to be of no concern.
There is nothing special about this ordinary double-sided tape, so all you have to do is cut it out and paste it. The only things I took care of were to wipe the surface to be attached, this time both Mobile Battery and Attachment, clean and degrease them, and to work so that the tape would be attached in one shot to the targeted position. I also made sure to apply the sticker in one shot at the target position.
The price may seem high for the Size, but it is securely attached, so I don't think I will drop it while driving.
Itu cukup kuat.
Untuk menggunakan Navigator Portabel yang dipasang di sekitar Stang dan DriveRecorder (DAYTONA DDR-S100) yang dipasang di Belakang sebagai penggerak Baterai Seluler, maka perlu dipasang Baterai Seluler di sekitar Stang. Timbul kebutuhan untuk memasang baterai ponsel di sekitar stang.
Saya ingin dapat dengan mudah memasang dan melepaskan Baterai Ponsel, maka saya memasangkan dudukan REC mount+ ke Penjepit Stang dan memasangkan Attachment ke Badan Baterai Ponsel agar dapat menggunakannya. Saya ingin menggunakan Attachment yang ada, jadi saya memutuskan untuk menggunakan Smartphone Holder yang saya punya sisa.
Saya memiliki selotip dua sisi dengan lebar 10mm, jadi saya bisa menggunakannya berdampingan. Saya mempunyai selotip dua sisi selebar 10mm, jadi saya bisa menggunakannya berdampingan, tapi saya pikir satu bagian akan lebih aman, jadi saya membeli tipe Kursi ini.
Karena untuk penggunaan di dalam mobil, mungkin tidak bagus saat hujan, tapi saya tidak berkendara saat hujan, dan karena Baterai Ponsel pada awalnya tidak tahan air, dan saya berniat melepasnya segera setelah itu. hujan, saya menganggap hujan tidak menjadi masalah.
Tidak ada yang istimewa dari selotip dua sisi biasa ini, jadi Anda hanya perlu memotongnya dan menempelkannya. Satu-satunya hal yang saya lakukan adalah menyeka permukaan yang akan ditempel, kali ini Baterai Ponsel dan Perlengkapannya, membersihkan dan menurunkannya, dan bekerja agar pita perekat dapat dipasang dalam satu pukulan ke posisi yang ditargetkan. Saya juga memastikan untuk menempelkan stiker sekaligus pada posisi target.
Harganya mungkin terlihat mahal untuk Ukurannya, tapi sudah terpasang dengan aman, jadi saya rasa saya tidak akan menjatuhkannya saat mengemudi.