- Beranda
- Ulasan Produk
- Perkakas
- Peralatan Khusus Motor
- Tahanan Kopling
- Murah, tapi tidak mudah digunakan.... (MINIMOTO: Universal Holder)
【MINIMOTO】Universal Holder Review
Cheap, but not easy to use.
[How is it used?
Used for Engine O/H of TZr50R.
In particular, a universal holder like this product is needed to remove the fixed nut of the Clutch.
Was the one you received as per Image?
We selected this product because it had the lowest Gold amount.
To be honest, I thought the cheap price would make the product quite poor, but it was not as bad as I expected.
The supplier may be the same as the ones offered by other Manufacturers because the pictures are the same.
How was your experience with it?
The ease of use is not all that great.
In the case of TZr, the fixed pin is hooked to the clutch housing, but the fixed pin is short and easily comes off,
I cannot apply force well. I have the impression that the size is not right for 4EUEngine, although it may be just the right size for other Scooters.
[Points to note]
Be careful not to put the fixed Pin in the wrong place.
I used it on two engines and accidentally put a pin on the bolt hole of the clutch, destroying the bolt hole.
How did it compare to other products?
Similar products are lined up at similar Gold prices, as if the suppliers are the same.
Once you buy one, it will last a lifetime, so you might as well get something a little more decent.
Murah, tapi tidak mudah digunakan.
[Bagaimana cara menggunakannya?
Digunakan untuk Mesin O/H TZr50R.
Khususnya, dudukan universal seperti produk ini diperlukan untuk melepas mur tetap Kopling.
Apakah yang Anda terima sesuai Gambar?
Kami memilih produk ini karena memiliki jumlah Emas terendah.
Sejujurnya, saya pikir harga yang murah akan membuat produk menjadi jelek, tapi ternyata tidak seburuk yang saya harapkan.
Suppliernya mungkin sama dengan yang ditawarkan Produsen lain karena gambarnya sama.
Bagaimana pengalaman Anda dengannya?
Kemudahan penggunaannya tidak terlalu bagus.
Dalam kasus TZr, pin tetap dihubungkan ke rumah kopling, tetapi pin tetap pendek dan mudah lepas,
Saya tidak bisa menerapkan kekuatan dengan baik. Saya mendapat kesan bahwa ukurannya tidak pas untuk 4EUEngine, meskipun ukurannya mungkin pas untuk Skuter lain.
[Hal-hal yang perlu diperhatikan]
Hati-hati jangan sampai memasang Pin tetap di tempat yang salah.
Saya menggunakannya pada dua mesin dan secara tidak sengaja memasang pin pada lubang baut kopling sehingga merusak lubang bautnya.
Bagaimana perbandingannya dengan produk lain?
Produk serupa dijejerkan dengan harga Emas serupa, seolah-olah pemasoknya sama.
Sekali Anda membelinya, itu akan bertahan seumur hidup, jadi sebaiknya Anda mendapatkan sesuatu yang lebih layak.