- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Indikator / Alat Ukur
- Film Pelindung Speedometer
- Sulit untuk diterapkan dengan rapi, tetapi sanga... (P&A International: Meter Panel Protection Film & Work Tools Seat)
【P&A International】Meter Panel Protection Film & Work Tools Seat Review
Sesuai: HONDA 400X, HONDA CB500F, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR500R, HONDA CBR650R
Difficult to apply neatly, but highly effective.
Non-glare film was used because daylight on the meter obscures the LED display. The film is highly effective and ensures visibility of the meter except when it is exposed to strong direct sunlight. However, due to the Film, the LED display looks a little dim.
Also, as mentioned in the Impression by others, film application is difficult. The difficult part is positioning the film and removing air bubbles. If you fail to do this properly and repeatedly reapply the film, it will lose its adhesiveness and peel off easily.
The first time I used this product was about 2 years ago, and although I reapplied it several times, it was slightly tilted against the meter panel and left several air bubbles, which was a compromise. Still, it has not peeled off after more than 2 years of use.
We decided to use this Film on our new vehicle. Basically, I followed the Instruction Manual (English Version only) that came with the product.
In this case, I used Mending Tape vertically on the right edge of the meter panel as a guide to position the film. After peeling off the protective film, lift up the film attached to the panel from the Left edge (do not peel off the entire film, as this will leave air bubbles). Then, I applied it again from the Right Side while pressing it with my finger to remove air bubbles, and was able to make it quite satisfactory. The spatula attached to the product is difficult to use.
Sulit untuk diterapkan dengan rapi, tetapi sangat efektif.
Film non-silau digunakan karena cahaya matahari pada meteran mengaburkan tampilan LED. Film ini sangat efektif dan memastikan visibilitas meteran kecuali saat terkena sinar matahari langsung yang kuat. Namun, karena Film, tampilan LED terlihat agak redup.
Juga, seperti yang disebutkan dalam Kesan oleh orang lain, aplikasi film itu sulit. Bagian yang sulit adalah memposisikan film dan menghilangkan gelembung udara. Jika Anda gagal melakukannya dengan benar dan berulang kali mengoleskan film, itu akan kehilangan daya rekatnya dan mudah terkelupas.
Pertama kali saya menggunakan produk ini sekitar 2 tahun yang lalu, dan meskipun saya menerapkannya kembali beberapa kali, itu sedikit miring ke panel meteran dan meninggalkan beberapa gelembung udara, yang merupakan kompromi. Namun, itu belum terkelupas setelah lebih dari 2 tahun digunakan.
Kami memutuskan untuk menggunakan Film ini pada kendaraan baru kami. Pada dasarnya, saya mengikuti Instruksi Manual (hanya Versi Bahasa Inggris) yang disertakan dengan produk.
Dalam hal ini, saya menggunakan Mending Tape secara vertikal di tepi kanan panel meteran sebagai panduan untuk memposisikan film. Setelah film pelindung terkelupas, angkat film yang menempel pada panel dari tepi kiri (jangan kelupas seluruh film, karena ini akan meninggalkan gelembung udara). Kemudian, saya menerapkannya lagi dari Sisi Kanan sambil menekannya dengan jari saya untuk menghilangkan gelembung udara, dan mampu membuatnya cukup memuaskan. Spatula yang menempel pada produk sulit digunakan.