- Beranda
- Ulasan Produk
- Sparepart Motor
- Rantai / Gear
- Sprocket Depan
- Sprocket Depan
- Produksi dalam negeri yang aman... (SUNSTAR: Front Sprocket)
【SUNSTAR】Front Sprocket Review
Sesuai: DUCATI 600SS, KAWASAKI SS900, DUCATI 888STRADA, DUCATI 900SL, DUCATI 750SS, DUCATI 900SS, DUCATI 851 SP3, DUCATI 851 SP2, DUCATI 851 SP1, DUCATI 851STRADA, KAWASAKI SS900, DUCATI MONSTER797, DUCATI MULTISTRADA620, DUCATI MONSTER695, DUCATI MONSTER696, DUCATI MONSTER800S, KAWASAKI SS800, DUCATI MONSTER620, DUCATI MONSTER620 DARK, DUCATI 620SPORT,
Safe domestic production
[How is it used?
A Small stone, which I think was picked up by the Rear tire when driving, was unfortunately caught in the Chain and broke 1 pc of the Sprocket tooth, which has hardly been used yet.
It's a waste of money, but I have no choice but to replace it.
Was the one you received as per Image?
The Sprocket with the broken tooth was also MADE IN SUNSTAR, but the shape was slightly changed and the wall thickness of the part that fits into the Spline was thinner.
Because it is not a large rotation speed and the outside diameter is small, I think that there is no effect such as the reduction of the GYRO effect even if it is lightened, but it is good that it is light.
Even though it's thinner. "It may not be strong enough..." I guess my old one was too sturdy because it's so solid that I can't believe it.
Was the installation difficult?
The product accuracy is high, so it is not difficult under normal circumstances.
In the case of me, it is a special vehicle that cannot be used as it is (it is necessary to set 2mmOffset), so in such a sense, the degree of difficulty is very high though the compatible model of the thing purchased is for DUCATI900SS.
How was your experience with it?
SUNSTAR as usual.
The quality is totally different from the cheap products of Large land-based companies.
At first glance, there is no difference between the Large and the Made in Sunstar, but the shape of the teeth is correct, so you can tell by the small amount of resistance when you push and pull.
More specifically, the distance you can run empty when you cut the Engine and come back is completely different from Chinese products.
[Included Parts:were they on?
There's nothing there! (Of course, no problem)
[Was there anything that disappointed you?
In order to unite with the Spline fixed Washer, there is the Screw hole which does the Bolt stop, but this time the Screw was a little rough, or the Screw was difficult to hang on very slightly.
I tried to kidnap the first 0.1 pile or so lightly, but it was too hard because it was baked.
The screw hole itself is perfect because it goes through easily by hand from the other side.
Well, it's not a problem because you just have to be careful and apply it carefully.
Other items that would be helpful
Opinions and requests to Manufacturer
MADE IN SUNSTAR has always had a paper Package, but this is exquisitely tacky.
At least if you stop the White Package, it will look a little more luxurious.
Or, you could go for the cheapest printing of one color BlackInk on a bare Dan Ball color with the highest quality and rigor.
Produksi dalam negeri yang aman
[Bagaimana cara menggunakannya?
Sebuah batu kecil, yang menurut saya terjepit oleh ban belakang saat dikendarai, sayangnya tersangkut di Rantai dan mematahkan 1 pc gigi Sprocket, yang belum pernah digunakan.
Buang-buang uang, tapi saya tidak punya pilihan selain menggantinya.
Apakah yang Anda terima sesuai Gambar?
Sprocket yang giginya patah juga MADE IN SUNSTAR, tetapi bentuknya sedikit berubah dan ketebalan dinding bagian yang pas dengan Spline lebih tipis.
Karena kecepatan putarannya tidak besar dan diameter luarnya kecil, menurut saya tidak ada efek seperti pengurangan efek GYRO meski diringankan, tapi bagusnya ringan.
Meski lebih tipis. "Mungkin tidak cukup kuat ..." Kurasa yang lama terlalu kokoh karena begitu kokoh sehingga aku tidak bisa mempercayainya.
Apakah pemasangannya sulit?
Akurasi produk tinggi, sehingga tidak sulit dalam keadaan normal.
Dalam kasus saya, itu adalah kendaraan khusus yang tidak dapat digunakan apa adanya (perlu untuk mengatur 2mmOffset), jadi dalam arti seperti itu, tingkat kesulitannya sangat tinggi meskipun model yang kompatibel dari barang yang dibeli adalah untuk DUCATI900SS.
Bagaimana pengalaman Anda dengannya?
SUNSTAR seperti biasa.
Kualitasnya sama sekali berbeda dengan produk murah dari perusahaan besar berbasis lahan.
Sepintas, tidak ada perbedaan antara Large dan Made in Sunstar, tetapi bentuk giginya benar, jadi Anda bisa tahu dari sedikit hambatan saat Anda mendorong dan menarik.
Lebih khusus lagi, jarak Anda dapat berlari kosong saat Anda mematikan mesin dan kembali benar-benar berbeda dengan produk China.
[Bagian yang Termasuk: apakah mereka aktif?
Tidak ada apa-apa di sana! (Tentu saja tidak masalah)
[Apakah ada yang membuatmu kecewa?
Untuk menyatu dengan Spline Fixed Washer, terdapat lubang Sekrup yang berfungsi untuk menghentikan Baut, tetapi kali ini Sekrup agak kasar, atau Sekrup sulit untuk digantung sedikit.
Saya mencoba menculik tumpukan 0,1 pertama atau lebih ringan, tetapi terlalu sulit karena dipanggang.
Lubang sekrup itu sendiri sempurna karena dapat dengan mudah ditembus dengan tangan dari sisi lain.
Yah, tidak masalah karena Anda hanya perlu berhati-hati dan menerapkannya dengan hati-hati.
Item lain yang akan membantu
Pendapat dan permintaan ke Produsen
MADE IN SUNSTAR selalu memiliki Paket kertas, tetapi ini sangat norak.
Setidaknya jika Anda menghentikan Paket Putih, itu akan terlihat sedikit lebih mewah.
Atau, Anda dapat memilih pencetakan BlackInk satu warna termurah pada warna Dan Ball telanjang dengan kualitas dan ketelitian tertinggi.