- Beranda
- Ulasan Produk
- Sparepart Motor
- Rantai / Gear
- Sprocket Depan
- Sprocket Depan
- SUNSTAR yang andal... (SUNSTAR: front sprocket)
【SUNSTAR】front sprocket Review
Sesuai: YAMAHA YZ125, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250F
Reliable SUNSTAR
[How is it used?
I replaced the front and rear Sprocket and Chain together because the Sprocket of my used WR250X was worn out very much. Before the replacement, 12 chains of the same made in Sunstar were installed, but we chose 13 chains of OEM because the main purpose of this bike is for street riding. The new chain is DID 520ERSV.
Was the one you received as per Image?
The front sprocket is Chrome molybdenum steel with no particular color, but since it is hidden by the cover, it is not a problem.
Was the installation difficult?
If you can use Impact, you can remove Nut instantly, but if you don't have Impact, you need to put GEAR and step on Rear brake to prevent Front sprocket from rotating. If you don't have Impact, you need to put GEAR in and step on the rear brake to prevent the front sprocket from rotating. It is dangerous if you can't hold the car body down, so it is safer to work with someone or ask the shop if you don't have the tools.
How was your experience with it?
There is no special thing that changes by changing to this Sprocket, but the GEAR ratio became Long by increasing the front one, and I was able to lower the RPM when cruising than 12. The rest is how much durability there is, but I think that it is enough if I can last that much this time because I always last for 10000km.
[Included Parts:were they on?
In case of WR250X, the Nut that holds the Front sprocket is a Crimp type, so you need to prepare a new Nut when you replace it. If you use the same Nut all the time, it may not crimp properly and the Nut may loosen while driving.
[Was there anything that disappointed you?
This is a Repeat product and I have no complaints.
SUNSTAR yang andal
[Bagaimana cara menggunakannya?
Saya mengganti Sprocket dan Rantai depan dan belakang secara bersamaan karena Sprocket WR250X bekas saya sudah sangat aus. Sebelum penggantian, 12 rantai yang sama buatan Sunstar dipasang, tetapi kami memilih 13 rantai OEM karena tujuan utama sepeda ini adalah untuk berkendara di jalanan. Rantai baru adalah DID 520ERSV.
Apakah yang Anda terima sesuai Gambar?
Sprocket depan adalah baja Chrome molibdenum tanpa warna tertentu, tetapi karena disembunyikan oleh penutup, itu tidak menjadi masalah.
Apakah pemasangannya sulit?
Kalau pakai Impact bisa langsung lepas Nut, tapi kalau tidak ada Impact harus pasang GEAR dan injak Rem Belakang agar sprocket depan tidak berputar. Jika Anda tidak memiliki Impact, Anda harus memasang GEAR dan menginjak rem belakang untuk mencegah sprocket depan berputar. Berbahaya jika Anda tidak dapat menahan badan mobil, jadi lebih aman untuk bekerja dengan seseorang atau bertanya kepada toko jika Anda tidak memiliki alatnya.
Bagaimana pengalaman Anda dengannya?
Tidak ada hal khusus yang berubah dengan mengganti Sprocket ini, tapi rasio GEAR menjadi Long dengan meningkatkan yang depan, dan saya bisa menurunkan RPM saat menjelajah dari 12. Selebihnya adalah berapa daya tahan yang ada, tapi saya pikir itu sudah cukup jika saya bisa bertahan sebanyak itu kali ini karena saya selalu bertahan 10000km.
[Bagian yang Termasuk: apakah mereka aktif?
Untuk WR250X, Mur yang menahan sproket Depan adalah jenis Crimp, jadi Anda perlu menyiapkan Nut baru saat menggantinya. Jika Anda menggunakan Mur yang sama sepanjang waktu, mur mungkin tidak berkerut dengan benar dan Mur dapat kendor saat mengemudi.
[Apakah ada yang membuatmu kecewa?
Ini adalah produk Ulangi dan saya tidak memiliki keluhan.