- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Switch / Harness
- Saklar Stang
- Rapuh dan halus, dengan banyak masalah.... (GALE SPEED: EA Switch Kit Brake Type)
【GALE SPEED】EA Switch Kit Brake Type Review
Fragile and delicate, with many problems.
A thin wire is stretched from a small SwitchBody with solder.
I broke it when I installed it, so I took it apart, but there are a bunch of problems
? Wiring of the solder is delicate and the structure is to pass Screw under the wire.
This makes it necessary to bend the root of the soldered wire, which puts a lot of load on the delicate root part. At least, the wire should be soldered diagonally to avoid Screw. When it bends, the root is already wobbly and it is likely to be torn.
The Switch box's black casing is made of plastic coated with a steel-like finish.
When you tighten the Banjo adapter or Hose, if you put Spanner etc. on it, it will be cracked.
? No water resistance.
The Handlebar part gets wet in the rain or when you wash your car, but it is a normal electronic switch that is not water resistant. If you are not careful, the inside will rust soon.
As mentioned above, the root of the wire is very delicate and fragile, so it's best to hold the wire completely in place when attaching the terminals to the wire; working with the SwitchBody will definitely tear the wire.
I'm buying an additional one because I broke mine and it's a Gale MASTER exclusive, but I don't want to buy this one if I can help it. I'm not surprised that it has a bad reputation when I buy it.
Rapuh dan halus, dengan banyak masalah.
Kawat tipis direntangkan dari SwitchBody kecil dengan solder.
Saya memecahkannya ketika saya menginstalnya, jadi saya membongkarnya, tetapi ada banyak masalah
? Pengkabelan solder halus dan strukturnya harus melewati Sekrup di bawah kawat.
Ini membuatnya perlu menekuk akar kawat yang disolder, yang memberi banyak beban pada bagian akar yang halus. Setidaknya, kawat harus disolder secara diagonal untuk menghindari sekrup. Saat ditekuk, akarnya sudah goyah dan kemungkinan besar akan sobek.
Casing hitam kotak Switch terbuat dari plastik yang dilapisi dengan lapisan seperti baja.
Ketika Anda mengencangkan adaptor atau Selang Banjo, jika Anda memasang Spanner dll di atasnya, itu akan retak.
? Tidak tahan air.
Bagian Handlebar basah karena hujan atau saat Anda mencuci mobil, tetapi ini adalah sakelar elektronik biasa yang tidak tahan air. Jika Anda tidak hati-hati, bagian dalam akan segera berkarat.
Seperti disebutkan di atas, akar kabel sangat halus dan rapuh, jadi sebaiknya pegang kabel sepenuhnya di tempatnya saat memasang terminal ke kabel; bekerja dengan SwitchBody pasti akan merobek kabelnya.
Saya membeli yang tambahan karena saya merusak milik saya dan ini adalah eksklusif Gale MASTER, tetapi saya tidak ingin membeli yang ini jika saya dapat membantu. Saya tidak terkejut bahwa ia memiliki reputasi buruk ketika saya membelinya.