- Beranda
- Ulasan Produk
- Sparepart Motor
- Rantai / Gear
- Sprocket Depan
- Sprocket Depan
- Ini digunakan untuk DownConversion MT-09.... (XAM: Front Sprocket)
【XAM】Front Sprocket Review
It is used for DownConversion of MT-09.
I added this product (C4221R17T) to convert the MT-09 chain to 520.
It's not in compliance at the time of this Review posting (September 2020), but it is available.
The NORMAL of the MT-09 is 16T, but we wanted to reduce the high-speed cruising speed a bit, so
I raised it to 17. In this case, as the front sprocket gets bigger, I'm going to use
A part of the rubber parts in the cover is cut by Cutter.
Naturally, the Rear Sprocket needs to be replaced with a 520 as well.
I went with ISA, Y-23-46 (45→46T)
From 16-45 (reduction ratio of 2.8125)
17-46 (reduction ratio 2.7059). About 4% higher geared. It is comfortable.
Chain to 2Piece long one.
In addition, conversions are at your own risk!
Ini digunakan untuk DownConversion MT-09.
Saya menambahkan produk ini (C4221R17T) untuk mengubah rantai MT-09 menjadi 520.
Itu tidak sesuai pada saat posting Ulasan ini (September 2020), tetapi tersedia.
NORMAL MT-09 adalah 16T, tetapi kami ingin sedikit mengurangi kecepatan jelajah kecepatan tinggi, jadi
Saya menaikkannya menjadi 17. Dalam hal ini, karena sproket depan semakin besar, saya akan menggunakan
Bagian dari bagian karet di penutup dipotong oleh Cutter.
Secara alami, Sprocket Belakang perlu diganti dengan 520 juga.
Saya menggunakan ISA, Y-23-46 (45→46T)
Dari 16-45 (rasio pengurangan 2.8125)
17-46 (rasio pengurangan 2,7059). Sekitar 4% lebih tinggi diarahkan. Sangat nyaman.
Rantai untuk 2Piece satu panjang.
Selain itu, konversi adalah risiko Anda sendiri!