- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Bracket Box
- Bahkan model terakhir SEROW dapat diinstal!... (YAMAHA: Rear Rack)
【YAMAHA】Rear Rack Review
Even the last model SEROW can be installed!
I'm using it on a 2018 Serow
On the Catalogue, the SEROW for 2018 and beyond is "Adventure Carrier Only is the OEM Lineup, but it's expensive, to say the least
There was some interference around the tail lamp on non-OEM products, and when the vehicle was purchased When I was discussing it with the manager of the Motorcycle Shop, he said, "It's strange that the installation is Large, but this The product will be attached after 2018
And we were introduced to them
It is not necessary to process the carrier itself, but it is possible to pimp it? could not
The tail cowl gets in the way when I try to install the Carrier
If the Carrier is installed first, the tail cowl cannot be installed
You need to feel like you're installing a Tail cowl and a Carrier at the same time, but it's a puzzle Status
After all, I am
The black part, like the frame of the tail lamp attached to the tail cowl, can be used as an example Once it's off (It's just four claws sticking together.)
Install the black frame part to the body of the car
The Carrier and the Tail Cowl are placed on the body of the vehicle together
Attach the tail cowl to the black frame part
Bolt-tighten the Carrier
This is the procedure I used to install it
If I have a complaint, it's that the Side Back Support that I installed at the same time (also here If you tighten it with the specified torque, you will not be able to use the Carrier Is it that the corner Pipe of the
If you use Side Back Support in combination with it, it is very cost effective It's a good product as well
Bahkan model terakhir SEROW dapat diinstal!
Saya menggunakannya di Serow 2018
Di Katalog, SEROW untuk 2018 dan seterusnya adalah "Hanya Operator Petualangan yang merupakan Lineup OEM, tapi harganya mahal, untuk sedikitnya
Ada beberapa gangguan di sekitar tail lamp pada produk non-OEM, dan ketika kendaraan dibeli Ketika saya mendiskusikannya dengan manajer Bengkel Motor, dia berkata, “Aneh pemasangannya Besar, tapi ini Produknya akan dilampirkan setelah 2018
Dan kami diperkenalkan kepada mereka
Tidak perlu memproses pembawa itu sendiri, tetapi apakah mungkin untuk menjadi germo? tidak dapat
Penutup ekor menghalangi ketika saya mencoba memasang Carrier
Jika Carrier dipasang terlebih dahulu, penutup ekor tidak dapat dipasang
Anda perlu merasa seperti sedang memasang penutup ekor dan Pengangkut pada saat yang bersamaan, tetapi ini adalah Status teka-teki
Lagipula, aku adalah
Bagian hitamnya, seperti rangka tail lamp yang menempel di tail cowl, bisa dijadikan contoh. Setelah lepas (Hanya ada empat cakar yang saling menempel.)
Pasang bagian bingkai hitam ke bodi mobil
Carrier dan Tail Cowl ditempatkan di badan kendaraan bersama-sama
Pasang penutup ekor ke bagian bingkai hitam
Kencangkan baut Carrier
Ini adalah prosedur yang saya gunakan untuk menginstalnya
Jika saya memiliki keluhan, itu Dukungan Samping Belakang yang saya pasang pada saat yang sama (juga di sini Jika Anda mengencangkannya dengan torsi yang ditentukan, Anda tidak akan dapat menggunakan Carrier Apakah itu pipa sudut
Jika Anda menggunakan Dukungan Sisi Belakang dalam kombinasi dengannya, itu sangat hemat biaya Ini juga produk yang bagus