- Beranda
- Ulasan Produk
- Sparepart Motor
- Rem
- Master Cylinder Rem
- OEM dll.... (NISSIN: [STD Lever] Brake Master Cylinder Kit [Horizontal Type 5/8-inches/Tank Separate Body Type])
【NISSIN】[STD Lever] Brake Master Cylinder Kit [Horizontal Type 5/8-inches/Tank Separate Body Type] Review
Sesuai: HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB750, HONDA CB750F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CBR400F, HONDA CBR400F, HONDA CBR900RRFire blade, HONDA CBX750F, HONDA CBX750F, HONDA NS250, HONDA NS250, HONDA CB1100F, HONDA CB1100R, HONDA CB1300 SF, HONDA CB400T CB250N,
OEM etc.
It's a 2008 BOLDOR, but it's starting to deteriorate here and there
This time, the OILLevel window of Master Cylinder was changed to white and deteriorated, making it difficult to see not only ... but also
It's the part that's always in my line of sight, so I'm curious about it and
I replaced the Handlebar with a Separate handle, so the angle doesn't fit anymore, and existence (at the present time)
I've decided to replace it
It is Master Cylinder of Nissin as well as OEM, but because it is separate tank type, it is possible to use it in the following ways Even if the Handlebar angle changes
It can be handled
Lever is the OEM Correspondence's Other Brand Product I've decided to use the one I was using again, though
Almost the same shape
However, there was a bump in the Switch section and that was the only part that had to be shaved off
I'm happy to say that with a simple process, I was able to install the Lever I had been using
OEM dll.
Ini adalah BOLDOR 2008, tapi mulai memburuk di sana-sini
Kali ini, jendela tingkat OILL Master Cylinder diubah menjadi putih dan memburuk, sehingga sulit untuk melihat tidak hanya ... tetapi juga
Itu adalah bagian yang selalu ada dalam pandanganku, jadi aku penasaran tentangnya dan
Saya mengganti Handlebar dengan Handle terpisah, sehingga sudutnya tidak pas lagi, dan keberadaannya (saat ini)
Saya telah memutuskan untuk menggantinya
Ini adalah Master Cylinder dari Nissin serta OEM, tetapi karena ini adalah jenis tangki terpisah, dimungkinkan untuk menggunakannya dengan cara berikut Bahkan jika sudut Stang berubah
Itu bisa ditangani
Tuas adalah Produk Merek Lain dari Korespondensi OEM Saya telah memutuskan untuk menggunakan yang saya gunakan lagi, meskipun
Bentuknya hampir sama
Namun, ada benjolan di bagian Switch dan itu adalah satu-satunya bagian yang harus dicukur
Saya senang untuk mengatakan bahwa dengan proses yang sederhana, saya dapat menginstal Lever yang telah saya gunakan