- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Stang & Kemudi
- Jalu Stang
- Ini agak mahal... (U-KANAYA: Aluminum Billet Handlebar End)
【U-KANAYA】Aluminum Billet Handlebar End Review
Sesuai: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR750 RS, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR750, KAWASAKI XANTHUS, KAWASAKI ZRX400, KAWASAKI ZRX400II
It's a bit expensive
I replaced it with the company's Lever
Bar End is of Large grain type, which is the same diameter as the Grip outer diameter
In this case, you'll need to make some adjustments to fit the end of the Clip, but you'll need to use the
A whole range of colors are included, so you won't have any trouble with them
This time it was a fixed type of Kawasaki M6 Bolt, so after adjusting the color Bolt it in place
It is the order to install the end cap, but you need to prepare a stopper (Locktiteetc.)
You should
As for the shape, it's nice to have an impeccable presence
Anodized is nicely finished and the build is well worth the price
One complaint I have is that the company has released Matte (matte finish) with their Lever, so I'm going to use that Lever choice
I did, but because there is no Matte in Bar End, I wondered if it lacked a sense of unity
Then, all of the types of these end cap attachments are the same, but I'm going to have to do a proof-of-concept experiment (tears) of falling over
When it did, when the wound enters the body from the end cap, the end cap was not able to be disassembled
Depending on the degree, the scratches (deformation) may cause the end cap to become locked and the cap
It didn't come loose when I turned it until the internal hexagon hole was numb
As a result, I broke it down and removed it, but you'll need to be careful because you'll need the right tools
That's why I'd be happy to have the higher priced Bar End sold on one side only
Ini agak mahal
Saya menggantinya dengan Tuas perusahaan
Bar End adalah tipe butiran besar, yang diameternya sama dengan diameter luar Grip
Dalam hal ini, Anda harus membuat beberapa penyesuaian agar sesuai dengan akhir Klip, tetapi Anda harus menggunakan
Berbagai macam warna disertakan, jadi Anda tidak akan mengalami masalah dengannya
Kali ini baut kawasaki m6 tipe fix, jadi setelah di sesuaikan warna baut nya di tempat
Ini adalah perintah untuk memasang penutup ujung, tetapi Anda perlu menyiapkan penghenti (Locktiteetc.)
Anda harus
Adapun bentuknya, itu bagus untuk memiliki kehadiran yang sempurna
Anodized selesai dengan baik dan bangunannya sepadan dengan harganya
Satu keluhan yang saya miliki adalah bahwa perusahaan telah merilis Matte (matte finish) dengan Lever mereka, jadi saya akan menggunakan pilihan Lever itu
Saya melakukannya, tetapi karena tidak ada Matte di Bar End, saya bertanya-tanya apakah itu tidak memiliki rasa persatuan
Kemudian, semua jenis lampiran penutup ujung ini sama, tetapi saya harus melakukan eksperimen bukti konsep (air mata) untuk terjatuh
Ketika itu terjadi, ketika luka masuk ke tubuh dari tutup ujung, tutup ujung tidak bisa dibongkar.
Tergantung pada derajatnya, goresan (deformasi) dapat menyebabkan tutup ujung terkunci dan tutupnya
Itu tidak lepas ketika saya memutarnya sampai lubang segi enam internal mati rasa
Akibatnya, saya memecahnya dan menghapusnya, tetapi Anda harus berhati-hati karena Anda memerlukan alat yang tepat
Itu sebabnya saya akan senang jika Bar End dengan harga lebih tinggi hanya dijual di satu sisi