- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Jok & Aksesoris
- Sparepart Jok Lainnya
- Kualitasnya bagus, harganya teliti.... (ai-net: Eye NetOriginal Motocross/Off-road vehicle UniversalSeat Cover)
【ai-net】Eye NetOriginal Motocross/Off-road vehicle UniversalSeat Cover Review
Sesuai: KAWASAKI KLX150, KAWASAKI KL250, HONDA XR250, HONDA XR200, HONDA XLX250, Others , SCORPA T-RIDE 250F, YAMAHA CT175, SUZUKI SX200, KAWASAKI 250TR Bison, HONDA XLR200, HONDA MTX200R/RII, HONDA CRF150R, HONDA CRM250AR, HONDA SL230, HONDA FMX650, HONDA CRM250R, HONDA XLR250, HONDA XL-DEGREE, HONDA XR230,
The quality is good, the price is conscientious.
I tried searching thinking that I wanted to imechen that the original Seat leather was damaged a little, this item came out.
I was hoping that Coloring was a missing item and I made it to Gray × Black that was safe.
Although it is Gray, though it looks at all in the image, it looked only at White, but if the color tone was different from Image, it was a color that could be arrangement with Well-dyed Q and it was good.
Although I forgot to mention, Seat's rework is a complete novice.
The work content is self-current.
By examining with Net
Tucker
needle
Slotted screwdriver
Nipper
Protective glasses
Dryer
It seems to be the minimum necessary tool.
So, I will continue working roughly.
There is no hardship to remove the old Seat leather.
Just pulling out the needle.
Next, set WaterproofSeat on SeatBody.
In the Instruction Manual, it is supposed to stretch leather Seat from above, but I think that WaterproofSeat is easier to stretch with Single Body, but Wrinkle does not have to enter.
Lightly paste, moderately tucker fasten and extra Seat will Cut.
Then leather Seat is covered from above and temporarily fastened.
After aligning the front and rear positions, once the Center comes out, temporarily fix and remove the center circle from the center of Seat and repeat and repeat the looseness to the outside, the front and rear positions are not misaligned If you can confirm, fold the quadrangle like a gyoza fold, fold it finely and fix it with Tucker.
I can not take a slack as I think, but carefully without impatience!
By the way, I do not use Dryer.
Because Seat becomes hard when overstretched, be careful.
Also, if you are not comfortable with work, you can cut the leather Seat with a little room.
If you can get sagging and wrinkle and carefully see that there is no Gap on Center, I will drive Tucker at 1 cm intervals.
Since the needle is easy to float in the folds, firmly push it so that the crease comes in the middle of the needle.
Finally, we finish the leather Seat which is left over with a Line of about 3 cm from Tucker.
Indeed, if you keep the basics it is something you can do neatly like a beginner like me.
* Tucker belongs to Daiso's 324 yen.
The needle has a Max's foot 6 mm.
At the fold, I hit the 8 mm thing.
It is a key product, but it is quality more than price.
Seat of Dimple machining is hard to slip and the hips no longer slide to Tank side.
this is good!
I was thinking of trying another Seat.
Kualitasnya bagus, harganya teliti.
Saya mencoba mencari berpikir bahwa saya ingin imechen bahwa kulit jok asli rusak sedikit, item ini keluar.
Saya berharap Mewarnai adalah barang yang hilang dan saya berhasil mencapai Gray × Black yang aman.
Meskipun abu-abu, meskipun terlihat sama sekali di gambar, itu hanya terlihat putih, tetapi jika nada warna berbeda dari gambar, itu adalah warna yang dapat diatur dengan Q yang diwarnai dengan baik dan itu bagus.
Meskipun saya lupa menyebutkan, pengerjaan ulang Seat adalah pemula yang lengkap.
Konten pekerjaan bersifat self-current.
Dengan memeriksa dengan Net
Makanan
jarum
Obeng berlubang
Sesuatu yg menjentik
Kacamata pelindung
Pengering
Tampaknya menjadi alat minimum yang diperlukan.
Jadi, saya akan terus bekerja dengan kasar.
Tidak ada kesulitan untuk melepas kulit jok yang lama.
Hanya mencabut jarum.
Selanjutnya, atur WaterproofSeat pada SeatBody.
Dalam Instruksi Manual, Seat kulit seharusnya meregang dari atas, tapi menurut saya WaterproofSeat lebih mudah diregangkan dengan Single Body, tapi Wrinkle tidak harus masuk.
Tempelkan sedikit, kencangkan sedikit dan Kursi ekstra akan Dipotong.
Kemudian jok kulit ditutup dari atas dan diikat sementara.
Setelah menyelaraskan posisi depan dan belakang, setelah bagian tengah keluar, perbaiki sementara dan lepaskan lingkaran tengah dari bagian tengah Kursi dan ulangi dan ulangi kelonggaran ke luar, posisi depan dan belakang tidak sejajar Jika Anda bisa memastikan, lipat segi empat seperti lipatan gyoza, lipat halus dan perbaiki dengan Tucker.
Saya tidak bisa mengendur seperti yang saya pikirkan, tapi hati-hati tanpa ketidaksabaran!
Omong-omong, saya tidak menggunakan Pengering.
Karena Kursi menjadi keras saat diregangkan, berhati-hatilah.
Juga, jika Anda tidak nyaman dengan pekerjaan, Anda dapat memotong jok kulit dengan sedikit ruang.
Jika Anda bisa kendur dan berkerut dan hati-hati melihat bahwa tidak ada Kesenjangan di Pusat, saya akan mengendarai Tucker pada interval 1 cm.
Karena jarum mudah mengapung di lipatan, dorong dengan kuat sehingga lipatan berada di tengah jarum.
Terakhir, kami menyelesaikan jok kulit yang tersisa dengan Garis sekitar 3 cm dari Tucker.
Memang, jika Anda menjaga dasar-dasarnya, itu adalah sesuatu yang dapat Anda lakukan dengan rapi seperti pemula seperti saya.
* Tucker milik Daiso 324 yen.
Jarum memiliki kaki Max 6 mm.
Di flip, saya menabrak benda 8 mm.
Ini adalah produk utama, tetapi kualitas lebih dari harga.
Kursi mesin Dimple sulit untuk tergelincir dan pinggul tidak lagi meluncur ke sisi Tangki.
ini bagus!
Saya sedang berpikir untuk mencoba Kursi lain.