- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Fairing
- Fairing Bawah / Belly Pan
- Harganya bagus, tapi hati-hati dengan pemasangan... (A-TECH: Under Cowl SPL)
【A-TECH】Under Cowl SPL Review
It's a good price, but be careful with the installation.
Impre is sorry for being too ruthless and follow impression.
Product is Carbon! Light! But when design is intact it will be debuby so paint or StickerTune recommended!
H2 is so warm the heat that it is better to take off the summer season? (I have not removed it)
From here on
Although it is installation, I tie up Bracket to Screw of generator, water Pump, but the attached Bracket
Probably, the shape is different from the product and prototype. As it is, as it interferes with Cover and can not narrow the Screw, Bracket's body mounting side of the Screw hole needs to be cut such as Cut or scraping the remaining White part, Small processing is necessary.
After machining, positioning while ensuring Clearance! Take care of the tightening Torque and complete it for the time being! Check for liquid leakage and lunch box interference after installation Check! With OK! With 10 to 30 minutes attached I will.
It is not my design of Image, but it is mostly satisfying.
Harganya bagus, tapi hati-hati dengan pemasangannya.
Impre minta maaf karena terlalu kejam dan mengikuti kesan.
Produk adalah Karbon! Lampu! Tetapi ketika desainnya utuh, itu akan menjadi debuby, jadi cat atau StickerTune direkomendasikan!
H2 begitu hangat panas yang lebih baik untuk melepas musim panas? (Saya belum menghapusnya)
Mulai dari sini
Meskipun pemasangan, saya mengikat Bracket ke Sekrup generator, Pompa air, tetapi Bracket yang terpasang
Mungkin bentuknya berbeda dengan produk dan prototipenya. Karena mengganggu Penutup dan tidak dapat mempersempit Sekrup, sisi pemasangan badan Bracket dari lubang Sekrup perlu dipotong seperti Memotong atau menggores bagian Putih yang tersisa, Diperlukan pemrosesan kecil.
Setelah pemesinan, pemosisian sambil memastikan Izin! Jaga Torsi pengencangan dan selesaikan untuk saat ini! Periksa kebocoran cairan dan gangguan kotak makan siang setelah pemasangan Periksa! Dengan Oke! Dengan 10 hingga 30 menit, saya akan melakukannya.
Ini bukan desain Gambar saya, tetapi sebagian besar memuaskan.