- Beranda
- Ulasan Produk
- Sparepart Motor
- Sparepart Mesin
- Sparepart Intake
- Insulator/Manifold
- Untuk TM-MJN24.... (KIJIMA: Rubber insulator)
【KIJIMA】Rubber insulator Review
Sesuai: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50
For TM-MJN24.
【What made you decide the purchase?】
Price and Size.
【How was it actually used?】
I used it to attach MJN 24 to CUB 90. It is good feeling with Exactly.
【Was it difficult to install? (Hard parts case)】
Manifold of CUB 90 and hole Pitch match, but step adjustment is necessary.
It is still difficult to balance with CUB 90 OEMAir cleaner.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Although not particularly, it is safe to use liquid Gasket.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
None.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Although it is not especially, it is saved if it is a little cheaper.
【Have you compared items?】
YOSHIMURAOEM Manifold
[Others]
I bought it for installing MJN 24 in CUB 90. As far as the carburetor side is customized Exactly without gaps
Attaches. On the Manifold side, 90 and Pitch are almost the same, but because there is a difference in level at the inlet, adjustment is essential.
Depending on the year, it is difficult to use C90's OEMAir cleaner because the front and rear lengths of carburetor and Manifold increase.
Become. If you process a C50 Air cleaner that is short and short, it seems to be possible somehow (But I have not tried it).
It is relatively inexpensive but construction is solid and it is very good.
It does not compare with Chinese cheap Manifold. When suddenly breaking or sucking secondary air with insufficient precision
Because it leads to blow if you do not do it well, you'd better buy the right one like this product.
Untuk TM-MJN24.
Apa yang membuat Anda memutuskan pembelian?】
Harga dan Ukuran.
Bagaimana itu sebenarnya digunakan?】
Saya menggunakannya untuk memasang MJN 24 ke CUB 90. Ini adalah perasaan yang baik dengan Persis.
Apakah sulit untuk menginstal? (Kasus bagian keras)】
Manifold CUB 90 dan lubang Pitch cocok, tetapi penyesuaian langkah diperlukan.
Masih sulit untuk menyeimbangkan dengan pembersih CUB 90 OEMAir.
Tolong beri tahu saya titik pemasangan dan gantung (dalam kasus bagian Keras)】
Meskipun tidak terlalu, aman untuk menggunakan Gasket cair.
Perasaan dan tinggi badan yang pas saat dipakai - Tolong beri tahu saya beratnya dll (Kotak pakaian) ]
Tidak ada.
[Apakah ada sesuatu yang membuat saya kecewa?]
Tidak ada.
Harapan untuk Pabrikan - Beri tahu saya jika Anda memiliki poin peningkatan]
Meski tidak terlalu istimewa, namun terselamatkan jika sedikit lebih murah.
Sudahkah Anda membandingkan item?】
Manifold YOSHIMURAOEM
[Yang lain]
Saya membelinya untuk menginstal MJN 24 di CUB 90. Sejauh sisi karburator disesuaikan Persis tanpa celah
Lampirkan. Di sisi Manifold, 90 dan Pitch hampir sama, tetapi karena ada perbedaan level di saluran masuk, penyesuaian sangat penting.
Tergantung pada tahun, sulit untuk menggunakan pembersih OEMAir C90 karena panjang depan dan belakang karburator dan Manifold bertambah.
Menjadi. Jika Anda memproses pembersih Udara C50 yang pendek dan pendek, sepertinya mungkin saja (Tapi saya belum mencobanya).
Ini relatif murah tetapi konstruksinya kokoh dan sangat bagus.
Itu tidak sebanding dengan Manifold murah Cina. Saat tiba-tiba pecah atau menyedot udara sekunder dengan presisi yang tidak memadai
Karena itu mengarah pada pukulan jika Anda tidak melakukannya dengan baik, Anda sebaiknya membeli yang tepat seperti produk ini.