- Beranda
- Ulasan Produk
- Sparepart Motor
- Kelistrikan
- Lampu
- Mika Lampu Sein
- Itu tidak dapat melakukan bolt-on ke blinker mur... (KIJIMA: Blinker Lens OEM Type)
【KIJIMA】Blinker Lens OEM Type Review
It cannot carry out bolt-on to a pure blinker. The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad. First, it does not become useful, unless the lug which must n
It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.
The lens of a right orange is purity and the left is a kijima blinker lens pure type.
Although I think that it is not understood since the lug is deleted, the difference in the die length of a cylinder portion should be understood.
Itu tidak dapat melakukan bolt-on ke blinker murni. Keakuratan pemrosesan memiliki bentuk aneh di mana dua yang buruk dan yang dibeli memiliki bentuk dadu yang sama, jauh dari buruk. Pertama, itu tidak menjadi berguna, kecuali lug yang harus n
Itu tidak dapat melakukan bolt-on ke blinker murni.
Keakuratan pemrosesan memiliki bentuk aneh di mana dua yang buruk dan yang dibeli memiliki bentuk dadu yang sama, jauh dari buruk.
Pertama, itu tidak menjadi berguna, kecuali jika lug yang tidak boleh berada di bagian yang menyentuh casing lingkar lensa hilang dari ketebalan die 2-mm40 mm dan menghapusnya dengan dua tempat, dan ini.
Selain itu, bagian silinder yang disekrup pada ulir sekrup dan menjadi sekrup perempuan tidak menyelesaikan pekerjaan yang membandingkan murni dan menekan ujung reflektor pasif pendek 3 mm.
Jika dianggap bahwa produk ini adalah jenis penutup mata yang murni hingga yang terakhir, dan merupakan jenis bahan baku yang memiliki kebutuhan untuk diproses dalam pemasangan, saya akan berpikir bahwa itu memuaskan.
Lensa oranye kanan adalah kemurnian dan kiri adalah jenis lensa penutup mata kijima murni.
Meskipun saya pikir itu tidak dipahami karena lug dihapus, perbedaan panjang cetakan bagian silinder harus dipahami.