- Beranda
- Ulasan Produk
- Sparepart Motor
- Bodywork
- Spakbor
- Fender Eliminator
- H2 SX SE - Penghilang Fender AKTIF... (ACTIVE: Fender Eliminator Kit)
【ACTIVE】Fender Eliminator Kit Review
H2 SX SE - ACTIVE Fender Eliminator
I fitted an R&G eliminator that cost me over $200 and although it fitted ok, it was essentially just a set of two flat plates that had no cover for electricals. So I had to tape up all of the wiring and was very untidy. The worst was yet to come as the flat plates vibrated terribly. Never happy with the set up!! So I decided to try the Active Tail Tidy. Besides getting instructions in only Japanese, the pictures helped a little and the kit fitted really well and it protects and neatly hides all of wiring, (that took me over 30min to strip off the special waterproof tape I used for the R&G kit). Additionally, the R&G kit had different connectors so I had to cut off the bikes original tail light connector, and guess what... the Active kit had the correct connector!!! So it was a shame that I cut off the original as now I’ve got shitty connectors to fit a great kit. I found that the panniers are now touching the indicators, but I’m going to have a go at bending the side plates slightly forward that should fix this issue easily enough. Stay away from an R$G and get an Active kit !!!
H2 SX SE - Penghilang Fender AKTIF
Saya memasang eliminator R&G yang harganya lebih dari $200 dan meskipun pas, itu pada dasarnya hanya satu set dua pelat datar yang tidak memiliki penutup untuk listrik. Jadi saya harus merekatkan semua kabel dan sangat tidak rapi. Yang terburuk belum datang ketika pelat-pelat datar bergetar hebat. Tidak pernah senang dengan pengaturannya !! Jadi saya memutuskan untuk mencoba Active Tail Tidy. Selain mendapatkan instruksi hanya dalam bahasa Jepang, gambar-gambarnya sedikit membantu dan kit dipasang dengan sangat baik dan melindungi dan menyembunyikan semua kabel dengan rapi, (yang membutuhkan waktu lebih dari 30 menit untuk melepaskan pita tahan air khusus yang saya gunakan untuk kit R&G). Selain itu, kit R&G memiliki konektor yang berbeda jadi saya harus memotong konektor lampu belakang asli sepeda, dan coba tebak... kit Aktif memiliki konektor yang benar!!! Jadi sayang sekali saya memotong yang asli karena sekarang saya memiliki konektor yang buruk agar sesuai dengan kit yang bagus. Saya menemukan bahwa pannier sekarang menyentuh indikator, tetapi saya akan mencoba menekuk pelat samping sedikit ke depan yang seharusnya memperbaiki masalah ini dengan cukup mudah. Jauhi R$G dan dapatkan kit Aktif !!!
Lihat aslinya