- Beranda
- Ulasan Produk
- Perkakas
- Peralatan Khusus Motor
- Peralatan Khusus Motor Lainnya
- Barangnya bagus, tapi saya tidak membutuhkannya!... (YAMAHA: YAMAHA OEM Rocker Arm Shaft Puller)
【YAMAHA】YAMAHA OEM Rocker Arm Shaft Puller Review
The stuff is good, but I didn't need it!
Purchased to remove Locker Arm on xs250sp 4a8.
I bought it without checking because it was mentioned in the tool section of the service manual and was also used in the photo of the procedure for removing the Locker Arm.
As a result, the Bolt of Locker Arm was M8 and the size was not M6.
If you check the photos of the procedure carefully, it is just a Bolt. The color is different!
I bought a M8×180mm Bolt for 300 yen at a nearby Home center and was able to remove it successfully.
Things are good. I just didn't need it.
Barangnya bagus, tapi saya tidak membutuhkannya!
Dibeli untuk melepas Locker Arm pada xs250sp 4a8.
Saya membelinya tanpa memeriksa karena disebutkan di bagian alat dari manual servis dan juga digunakan dalam foto prosedur melepas Lengan Loker.
Alhasil, Baut Locker Arm adalah M8 dan ukurannya bukan M6.
Jika Anda memeriksa foto-foto prosedur dengan hati-hati, itu hanya Baut. Warnanya berbeda!
Saya membeli Baut M8x180mm seharga 300 yen di pusat Rumah terdekat dan berhasil melepasnya.
Hal-hal yang baik. Aku hanya tidak membutuhkannya.