- Beranda
- Ulasan Produk
- Sparepart Motor
- Rantai / Gear
- Sparepart Kopling Lainnya
- Ini bekerja dengan baik dengan Reinforced Clutch... (KIJIMA: Light Clutch Kit)
【KIJIMA】Light Clutch Kit Review
Sesuai: BUELL XB12R Firebolt, BUELL X1W White Lightning, BUELL X1 Lightning, BUELL S3T Thunderbolt, BUELL S3 Thunderbolt, BUELL S2T Thunderbolt, BUELL S2 Thunderbolt, BUELL S1 White Lightning, BUELL S1 Lightning, BUELL M2 Cyclone Low, BUELL M2 Cyclone, BUELL Blast 500, BUELL 1190 SX, BUELL 1190 RX, BUELL 1125 R, BUELL 1125 CR, HARLEY-DAVIDSON Iron 883 XLN, HARLEY-DAVIDSON Seventy-Two XLV, HARLEY-DAVIDSON SuperLow 1200 XLT, HARLEY-DAVIDSON Sportster 883 XLH,
It worked well with Reinforced Clutch.
I installed a Reinforced Clutch Kit on my XL1200X after the spring plate broke, but I was fed up with the weight of the clutch, so I decided to install a Reinforced Clutch Kit this time.
I was worried about the VPClutch, but I chose the light clutch kit because the strokes of the clutch lever seem to have been shortened by the reinforced clutch.
Clutch releaseLamp adjustment is a bit severe, but the weight of the clutch lever is as light as NORMAL, and I was honestly surprised at the effect.
There is a lot of information on the Net about the work itself, so if you have the level of skill to remove the primary cover and replace the oil, I think you should be able to do it.
In my case, the adjusted LeverStroke is Quantity:Since 2-pc finger clutch operation is only limitable, I think it would be more secure if it were a normal clutch.
If you have installed a reinforced clutch, and as a result, the strokes are heavy, but there is room in the strokes, we would recommend you to install a reinforced clutch.
Ini bekerja dengan baik dengan Reinforced Clutch.
Saya memasang Reinforced Clutch Kit pada XL1200X setelah pelat pegas putus, tetapi saya muak dengan bobot kopling, jadi saya memutuskan untuk memasang Reinforced Clutch Kit kali ini.
Saya khawatir dengan VPClutch, tapi saya memilih kit kopling yang ringan karena tuas kopling sepertinya dipersingkat oleh kopling yang diperkuat.
Pelepasan kopling Penyesuaian lampu agak berat, tetapi bobot tuas kopling seringan NORMAL, dan sejujurnya saya terkejut dengan efeknya.
Ada banyak informasi di Internet tentang pekerjaan itu sendiri, jadi jika Anda memiliki tingkat keahlian untuk melepas penutup utama dan mengganti oli, menurut saya Anda harus bisa melakukannya.
Dalam kasus saya, LeverStroke yang disesuaikan adalah Kuantitas: Karena operasi kopling jari 2 buah hanya terbatas, saya rasa akan lebih aman jika menggunakan kopling normal.
Jika Anda telah memasang kopling yang diperkuat, dan akibatnya, langkahnya berat, tetapi masih ada ruang pada langkahnya, kami sarankan Anda untuk memasang kopling yang diperkuat.