- Beranda
- Ulasan Produk
- Perkakas
- Perlengkapan Pembuangan Oli Motor
- Perlengkapan Pembuangan Oli Motor
- Yang terbaik adalah membuat kolam Minyak di teng... (Webike Garage: Oil Disposal BOX 2L Nitrile Gloves Set)
【Webike Garage】Oil Disposal BOX 2L Nitrile Gloves Set Review
It is best to create an Oil pool in the middle before use.
When Oil is allowed to fall naturally, more of it overflows through the surface than is sucked in. 。 It is a good idea to make an Oil reservoir in the middle. 。 According to the service manual, the amount of oil for Z125pro is 900cc, but if the oil is added while checking the gauge, 1000cc is the appropriate amount. (In fact, we had no problem even with half the 500cc.) When changing oil, flushing is done with cheap mineral oil at 1000 yen/L and running for about 15 minutes. (It can be rotated to high RPM) Then, we put in RACINGGrade Oil, which is our main product! 。 It is not surprising that it is cheaper than flushing oil. 。 So, we process 2L of waste oil at a time, so it is convenient for us to use! 。 The tightening Torque of the Drain is 28.
Yang terbaik adalah membuat kolam Minyak di tengah sebelum digunakan.
Saat Minyak dibiarkan jatuh secara alami, lebih banyak yang meluap melalui permukaan daripada yang tersedot. Adalah ide yang bagus untuk membuat reservoir Minyak di tengahnya. 。 Menurut manual servis, jumlah oli untuk Z125pro adalah 900cc, tetapi jika oli ditambahkan saat memeriksa pengukur, 1000cc adalah jumlah yang sesuai. (Faktanya, kami tidak punya masalah bahkan dengan setengah dari 500cc.) Saat mengganti oli, pembilasan dilakukan dengan oli mineral murah seharga 1000 yen/L dan berjalan sekitar 15 menit. (Bisa diputar ke RPM tinggi) Kemudian, kami memasukkan Oli RACINGGrade, yang merupakan produk utama kami! 。 Tidak mengherankan jika lebih murah daripada minyak pembilas. 。 Jadi, kami memproses 2L limbah minyak sekaligus, jadi nyaman untuk kami gunakan! 。 Torsi pengencangan Pembuangan adalah 28.
Lihat aslinya